Got new wheels for my anniversary. Best wife in the world!!! 17x10

 

nice wife...i mean wheels...i mean both! get some tires so we can truly see what it looks like on the car.

 

Soon

 

Test Fitting complete.

 

Looks like you'll need something more aggressive than flares...

 

More progress

 

All Done




It took some work

 

Looks great with the flares, where did you get the fender mirrors

 

Negative camber will help tuck in the front. Get some T3 camber plates.

 

Thanks!

They are from a JDM 323. We found them on Ebay.

 

Added a additional electric fan. Only pic I took before the reattaching the header panel.

 

The alternator died. So I replaced with a 160amp one.

 

Installed a themo switch for the fan.



And this came in today.

 

Got the pre-turbo water injection working.

 

Adjustable wastegate actuator for s5 turbos. The original actuator has gotten weak. Even maxing out the duty cycle of the boost solenoid and the boost would not go any higher. https://www.rx7club.com/power-fc-for...er-fc-1089097/

now i should be able to turn up the boost!!!

 

Have not had much time work on the car. I have been working a lot of hours. soon more boost!

 

Finally got some time to work on the car. I now have car the tuned for 12 psi. It is quite a ride now.





Now that everything works i am going to redo the wiring using these.

 

Finally finished my wiring job. It started first try!!!! It was a lot of work. I forgot to take more pictures after it was finished.

Got rid of some wires. Actually a lot more than this.



Engine Plug in progress.



Engine Plug Complete.



Parts to finish that battery relocation.



Getting close.

 

nice work on the wiring bulkhead connectors, that a good idea!

 

After seeing this thread i decided this would be perfect to monitor my car.

https://www.rx7club.com/power-fc-for...iewer-1052741/

 

Added an oil temp and fuel pressure sensor.


Still Working on the grounding for the sensors

I got tried of fighting the v-belts and change to a toothed belt. It is so much better no slipping when it is cold or wet.

 

Looks good, how close is the fan to your radiator, in the picture, it looks really close. Where did you get the belt kit from

 

I got the belt kit from Apex-Motoring on ebay. The fan is not as close as it looks.

 

Thank you, definitely going to check them out.

 

you have 17x10's on the front? I have the same wheels as you do but in 15x9 +10 and on a gsl-se suspension with t3 camber plates/kit.