85 GSL SE starting point
#1
Junior Member
Thread Starter
85 GSL SE starting point
Just picked up the 85 GSL SE. My plans are to restore her as best I can back to original condition. From what I have been told not many GSL SE Were sold and 85. So I would like to try and make it as original as I can. Car fax came back clean.....but due to the age who knows it’s early life. Here is a list in things at this point of things I found in the first 82 hours.
1. Possible rear end needs to be rebuilt. Still need to full test it. Should know this week.
2. OMP has been removed, will reinstall one when found.
3. Rear wiper are replaced
4. New interior as it seems front seat have be redone. ( cloth not leather). Carpet in trunk area is ripped.
5. steering column plastic replaced (missing)
I’m new to RX-7’s so I’m sure as I go I will find more things that have been replaced or missing. These are just the few things I can see at this point. Hope everyone enjoys the journey with me. Here are some pictures of the car as it sits.
Pictures We’re taken at the owner’s house that I purchased it from the 79 SA is his not mine.
1. Possible rear end needs to be rebuilt. Still need to full test it. Should know this week.
2. OMP has been removed, will reinstall one when found.
3. Rear wiper are replaced
4. New interior as it seems front seat have be redone. ( cloth not leather). Carpet in trunk area is ripped.
5. steering column plastic replaced (missing)
I’m new to RX-7’s so I’m sure as I go I will find more things that have been replaced or missing. These are just the few things I can see at this point. Hope everyone enjoys the journey with me. Here are some pictures of the car as it sits.
Pictures We’re taken at the owner’s house that I purchased it from the 79 SA is his not mine.
#2
ancient wizard...
Welcome to the forum,car looks in fair condition.Any rust on it that you can see.Look in rear fenderwell,remove storage bin behind seats and look at inside of fenderwell. This area known for gathering rust in these cars.
Why do you say rear end needs to be rebuilt?
Why do you say rear end needs to be rebuilt?
#3
Junior Member
Thread Starter
Thank you for that information. I will check it out after work. Have a clunking sound when the car is In Drive. Sounds like a flat tire. I have no play in the drive line. So I’m going to disconnect the drive line, spin the tire and see if the noise is still present. I don’t see any marks that the drive line is hitting something else. So just going threw Process of illumination.
#4
Junior Member
Thread Starter
Also no rust that I could find while inspecting it. Since I’m new to RX-7’s I didn’t know all the trouble areas. So fingers crossed I don’t find cancer. If so, time to do some body work.
Trending Topics
#10
Junior Member
Thread Starter
#11
ancient wizard...
I'd plan on replacing axle bearing/seals both sides. To get to that mileage they'll have been replaced at least once. You can hear the right side,may not be able to hear the left side-yet,but may when you get rid of noise on right.
Good time to change the diff oil. Swim a magnet around in what is drained for evidence of metal shrapnel. Be sure to add friction modifier on refill.
Good time to change the diff oil. Swim a magnet around in what is drained for evidence of metal shrapnel. Be sure to add friction modifier on refill.
#12
Junior Member
Thread Starter
I'd plan on replacing axle bearing/seals both sides. To get to that mileage they'll have been replaced at least once. You can hear the right side,may not be able to hear the left side-yet,but may when you get rid of noise on right.
Good time to change the diff oil. Swim a magnet around in what is drained for evidence of metal shrapnel. Be sure to add friction modifier on refill.
Good time to change the diff oil. Swim a magnet around in what is drained for evidence of metal shrapnel. Be sure to add friction modifier on refill.
Thread
Thread Starter
Forum
Replies
Last Post