6 Attachment(s)
Exhaust hasnt been changed yet :cool:
Been a busy few days. Ripped out the whole interior minus the dash to get rid of all unused wires etc and clean everything up nicely. Received my new BC Racing coilovers last Thursday they look epic. Went to the Jozi Kxlektive meet yesterday. Was a leka day out with the gents and the stunning cars :drool: Now gotta get gearbox changed, and detail the car and polish things up for the Speed and Sound show in September. On to some pics Attachment 609527 Mr Nico Attachment 609528 Mr Krutch Attachment 609529 Attachment 609530 https://i1372.photobucket.com/albums...psatr9pcqv.jpg Attachment 609531 Attachment 609532 |
4 Attachment(s)
|
8 Attachment(s)
So the preparations began for our local tuner magazine show that happened 3 weeks back.
1. Install new plugs 2. Install spare gearbox 3. Get paint correction done as well as wash and wax So set about installing the coilovers. Install went smoothly minus using tressles and jacks. Need a 2 post lift asap!! Attachment 608502 http://i1372.photobucket.com/albums/...pschuwkyjs.jpg Attachment 608503 Next were the Spark plugs. These things were wetter than a beach umbrella in a monsoon! Attachment 608504 Attachment 608505 Attachment 608506 End result wound down the coilovers a bit more than usual for the show . Sitting perfect minus the need of some spacers Attachment 608507 Attachment 608508 Attachment 608509 |
4 Attachment(s)
Got to meet Mr Liberty Walk himself Kato San from Japan. Crazy ass guy
Attachment 608498 Took the car for a tune as I knew it was running extremely rich. My tuner ironed out one or two things and then we started. The car still battles to start though Attachment 608499 8psi run - 363hp Attachment 608500 We then turned the boost up to max boost on 95octane pump gas 11psi - 470hp Attachment 608501 Car pulls awesome however with it being a truck turbo the wheels in the turbo are small hence the power dropping shortly after 7000rpm. Need to get some bigger wheels machined in the turbo so it can hold power till atleast 9000rpm |
Mad mike at Supa Drift
8 Attachment(s)
We then had Round 6 of our local Supa Drift event held at Carnival City with Mad mike in the badbul making an appearance:icon_tup:
Lifted the car slightly to get over the speed bumps, gave it a nice wash the night before along with my friends triple rotor beast. Set out to Carnival City early Saturday morning to get a nice parking spot. Car was on display for a local bisuness selling car cleaning products Called Turtle wax. Got to meet Mr MannyKiller along with Warren from PPRE, mad mike as well as Lincoln. Awesome bunch of fellas, so accommodating and always make time for some chit chat. Nice and clean http://i1372.photobucket.com/albums/...psjcubvhoy.jpg Attachment 608490 Meet up for the convoy through to Carnival City Attachment 608491 Sitting pretty on display Attachment 608492 Badbul baby !!! 20b goodness :icon_tup: Attachment 608493 Bay looking okayish Attachment 608494 Mr Aaron Parker with Lincoln Whiddett Attachment 608495 Aaron and I repping by the Badbul before loading it in to the truck Attachment 608496 http://i1372.photobucket.com/albums/...psadookbzw.jpg Attachment 608497 Was so awesome to hear that 20b singing with clouds of endless smoke pouring off the rear tyres. Epic build on that Rx8, carbon everywhere, Haltech ecu, garrett turbo, alot of CNC machining work done! |
10 Attachment(s)
So this passed weekend was our local 7Stock called RotorFest. It is held at Red Star Raceway. They have a show and shine and then a power cruise. later they open the track for us to use.
I had lowered the car a bit for the event as well as stiffening up the suspension halfway between soft and hard. Car performed perfectly pulled like a machine and the new suspension really makes the car feel more stable. Some awesome cars came out to play however the ones I was looking forward to most did not come. A re amemiya kitted fd with a 4 rotor turbo motor as well as a 6 rotor NA motor in a BMW V10 M6 body. On to some pics I took with my phone quickly Quite a serious Ford Anglia Drag car to be tuned in 2 weeks Attachment 608469 Awesome FC Attachment 608470 Plenty of these here just needs some decent wheels Attachment 608471 Attachment 608472 Front is a 13b drift car rear is a 20b streetcar husband and wife Attachment 608473 Attachment 608474 Attachment 608475 Attachment 608476 Attachment 608477 Attachment 608478 |
9 Attachment(s)
Attachment 608460
Attachment 608461 Attachment 608462 Attachment 608463 Attachment 608464 Attachment 608465 Attachment 608466 And then 2 epic pics from Supa Drift by my mate Nico Di Folco Attachment 608467 Attachment 608468 |
Use lots of heat and go really slow when doing those fenders if you don't want to crack that paint..!
Your FD looks so much better dropped down lower in those last pics there. I look fwd to seeing how the bags turn out; Nice Rotorfest pics btw! |
Originally Posted by LO7
(Post 12124622)
Use lots of heat and go really slow when doing those fenders if you don't want to crack that paint..!
Your FD looks so much better dropped down lower in those last pics there. I look fwd to seeing how the bags turn out; Nice Rotorfest pics btw! |
7 Attachment(s)
Whats up guys
Been an eventful few months here in Sunny South Africa. Started off with coming home from our local Rotorfest in September. Parked the car, went inside the house then decided to put the car in the garage. Went to the car tried to start it a few times and nothing:scratch: Checked plugs, changed plugs, checked fuel pump relay, checked the settings on the Microtech and still nothing. Got my motor builder over with a compression tester to have a look and see. Didnt look good. He told me Compression was down on both rotors. Seems my motor gave up:( The following week my father and I set up about taking the motor out the car to get it stripped and sorted out. Whilst trying to get the motor out we came across a few things. Exhaust manifold was loose, oil drain for the turbo was loose on the motor only one of 2 nuts tightened and the left hand side motor mount had sheared in half, atleast I found my knocking noise now after all these months. Attachment 607271 Attachment 607272 Attachment 607273 The motor was then disassembled a week later. It seems the side seal clearance was incorrect and there was blow-by there, looks like the stock port was opened too much by original engine builder before I bought the car so the side seal was not clearing the port and was hitting edge of the port and eventually broke. The rotors both have lovely dents on them from detonation, the oil pick up in the sump gauge was squashed so was not getting adequate oil which also ate up the bearings:icon_tdow The plated have ridges in them as well and the centre plate port is too large to use again. Attachment 607274 http://i1372.photobucket.com/albums/...psiapzh73c.jpg Attachment 607275 Attachment 607276 Attachment 607277 Luckily I have a spare stock 13b series 6 motor laying in the garage at home :nod: That was then taken the weekend after to get opened up to see what is going on with that motor. Thank the lord it was stock port, seems to have been rebuilt but all in good conditions plates are like new, only thing bearings look like they were on their way out. So we will be porting and doweling the spare motor and building that rather than the motor that was in the car. We will be going with a V-mount setup with the Koyo Rad and a new intercooler so the car can run cooler. I am changing the manifold again to one with shorter runners so the turbo can sit lower and thinking about changing out the turbo again to something with more flow as my turbo makes peak power at around 6500rpm so I don’t even rev passed 7000rpm. Want to hold power till around 8500-900rpm so will see once we have the motor back. |
11 Attachment(s)
Some pics of the Spare motor
Attachment 607260 Attachment 607261 Attachment 607262 Still 100%. Porting has commenced this week so should have it together in the next few weeks:icon_tup: Wrecked Motor mount Attachment 607263 IN other news a mate of mine got married 2 weeks back. I accompanied the nest men and the groom early in the morning to the venue to have some pre drinks and warm up for the day Attachment 607264 And then the Platinum came out Attachment 607265 He was dropped off in my best mate's Jetta 6 with modified BBS Speedline wheels and Airlift perfomance suspension. He is the same guy earlier in the thread with a white Golf 5 GTI on air. Attachment 607266 Car was dirty as hell but still looked good on my Samsung Note camera Attachment 607267 Attachment 607268 Recently also been helping my mate with his Rx7 getting ready for a drag event happening this weekend coming. He got the car 5 years back and ran it until the stock motor broke. He has built and ported the motor now along with a Holset hx55 turbo, 3 bosch 044 pumps and full ethanol. Should run nicely when done Attachment 607269 Attachment 607270 |
4 Attachment(s)
Last week we experienced some seriously crazy weather here in the east of Johannesburg. It had not rained for months here and we were experiencing a drought here. Our local dams and rivers are sitting on around 25% full which is extremely low so saying we needed rain was a bit of an understatement.
Last Wednesday it has an awesome sunny day up until around 3PM. Very black clouds rolled in so we all though oh nice, some rain would be lovely. 2 hours later this was the state of our roads: http://i1372.photobucket.com/albums/...psq3dry2xi.jpg On off the freeway offramps: Attachment 607256 A basement parking Attachment 607257 What seems to be a mk4 Supra who tried to find shelter under the bridge got the short end of the stick fully submerged in water: Attachment 607258 Standstill on the freeway: Attachment 607259 |
Air lift suspension
2 Attachment(s)
OK guys
So on to the suspension on the Rx7 I will be running BC V1 coilovers and I am installing Airlift performance bellows that screw on to the strutt. I placed the order for the bags start of August and I received them last week how terrible but atleast they arrived. List: BC V1 coilovers Airlift performance bags V2 AutoPilot management Viair 444c compressor 4gal tank The lines and V2 management along with the tank and compressor were installed in September a week before the bags were supposed to have arrived. After work today im going to pull the coilovers out and put the bags on. I just had to get some fittings etc first The much anticipated box: http://i1372.photobucket.com/albums/...psw0ub6ts5.jpg The goods: Attachment 607254 Attachment 607255 I reckon this car should be very close to the floor when aired out. I shall update soon once it has been installed and tested:icon_tup: |
nice and that flood is crazy.
|
Yoh, flood was in the east right? Thankfully your 7 didn't get swallowed up.
|
Originally Posted by 7speed
(Post 12124773)
Yoh, flood was in the east right? Thankfully your 7 didn't get swallowed up.
|
WOW........Glad you are ok man!! That is some serious Rain!!!!
Glad you've got the new build underway!!!! Keep at it brotha!!! Looking good!! |
Originally Posted by mannykiller
(Post 12126186)
WOW........Glad you are ok man!! That is some serious Rain!!!!
Glad you've got the new build underway!!!! Keep at it brotha!!! Looking good!! Thanks man yeah 2017 time to take it to the track and enjoy it turn the boost up and go:nod: |
5 Attachment(s)
Whats up guys.
So been back at it fiddling away on Sunday whilst being terribly hungover eventually got the bags in and working. Once working we found out quickly the bags are leaking. They are Honda S2000 bellows for the BC coilovers. Turns out the oring inside the bag is to big for the shaft of the coilover. So we got a smaller oring so it can seal and will install again tomorrow and see if it did the trick. Still need to wind the rear struts to make them shorter for the car to sit a bit lower in the rear Attachment 607122 Subframe sitting nice and low Attachment 607123 Attachment 607124 http://i1372.photobucket.com/albums/...psaj2uihm6.jpg My mate standing next to the car he is around 1.80m tall Attachment 607125 And a pic of the car at Rotorfest with some promo girls with a funny caption Attachment 607126 |
Your mate needs to eat a sandwich :)
|
Originally Posted by 7_rocket
(Post 12126764)
Your mate needs to eat a sandwich :)
Its weight reduction bro so we can go faster |
8 Attachment(s)
Whats up everyone.
Happy new year to all. So after a hectic December I managed to pull finger out my ass and do some work on the car. Scrubbed down the bay and started prepping it for spray. Attachment 605569 1x Coat primer to seal everything up proper Attachment 605570 And done Attachment 605571 Attachment 605572 Attachment 605573 One of many boxes of nuts and bolts and other shyte plated Attachment 605574 Decided to use left over paint from my wheels for a few odds and ends while they were stripped out the bay namely brake booster, windscreen wiper motor and engine front cover Attachment 605575 Attachment 605576 |
8 Attachment(s)
Motor has been ported and doweled.
1-2 pics sent to me prior to polishing of the ports and all that Attachment 605561 Attachment 605562 Attachment 605563 Booster in the bay to see how it will look Attachment 605564 Attachment 605565 And wiper motor Attachment 605566 Got an intercooler for Mahala so will run that. Just changing the outlets on the ends then will send it for anodising Attachment 605567 2 Smaller Airlift tanks came in yesterday. Now to Decide what to do in the boot Attachment 605568 Gonna get boost pipes done in Aluminium too so they can be anodized. Rest of the motor etc will be black. Trying to sell my turbo so i can buy another one with a 1.15 AR housing. New exhaust manifold has been built so hopefully this will be back on the road soon :hug: |
Coming together slowly
http://i1372.photobucket.com/albums/...psznm7f9lq.jpg Checking clearances http://i1372.photobucket.com/albums/...pszznsctjs.jpg And done http://i1372.photobucket.com/albums/...pstave1d7u.jpg http://i1372.photobucket.com/albums/...psteqquabs.jpg http://i1372.photobucket.com/albums/...pssvbbj36c.jpg http://i1372.photobucket.com/albums/...psc2c9zjpj.jpg http://i1372.photobucket.com/albums/...psykoj9cfn.jpg And one of my friends helping me load the engine http://i1372.photobucket.com/albums/...pslbw4g8br.jpg Very happy with the work carried out. The motor along with the plated parts looks awesome. Now I need to tidy up the engine harness and spray a few other odds and ends |
All times are GMT -5. The time now is 01:30 PM. |
© 2024 MH Sub I, LLC dba Internet Brands