Originally Posted by Turblown
(Post 11902322)
Is this Warren by chance?
|
Gotta undo motor mounts tomorrow and jack the motor up. Sump isn't sealed well.. it's pissing oil!! Then going to dyno next week get a proper tune done.
Once car is tuned then will order Adaptronic ecu from Elliott. Keen to give it a bash |
5 Attachment(s)
So the oil leak has been sorted atleast.
Went to get the car tuned however I was receiving RPM interference and "Home" and "Reference" errors on the Microtech handset. The timing was jumping all over the place. The guy managed to tune the car a bit so I can drive it. So then my mission was to sort out the interference issues and the errors. Turns out wires were wrong way around on one of the crank angle sensor plugs:( Changed the wires around and no more errors or red light on the ECU happy days!! So gonna take the car back for a tune sometime soon so I can go race the car and enjoy it a bit. The guy who fixed my ecu problem has a nice Borg warner S400 76mm turbo for me with a 1.10 exhaust housing:icon_tup: Going to buy that and get a new manifold made same time but first Im collecting some fuel goodies to go with the larger turbo Things on order at the moment: 1x bosch 044 fuel pump 1x AEM FPR Aftermarket Primary and secondary fuel rails 2x 1600cc secondary injectors Some recent pics from the passed few weeks Attachment 624645 Attachment 624646 Little Rotary gathering the other day Attachment 624647 My car with a 650kw Supra Attachment 624648 http://i1372.photobucket.com/albums/...pse8eemiyt.jpg My Fd and my mates GTI on neochrome Rota's and Airlift air suspension Attachment 624649 |
10 Attachment(s)
A few more recent pics
Attachment 624632 Attachment 624633 Attachment 624634 Adjusted my headlights to give it that sleepy eye look Attachment 624635 Attachment 624636 I then went for a nice 3-step Meguires polish yesterday car is shining so nicely Attachment 624637 Attachment 624638 Attachment 624639 Some other shots of my car The silver FD is bone stock made 280hp stock motor stock boost stock fuelling Attachment 624640 Attachment 624641 http://i1372.photobucket.com/albums/...pssuuffxp7.jpg Awaiting on more pics:icon_tup: Cheers guys |
6 Attachment(s)
Update time
Got the car tuned eventually after fixing the errors with the crank pick ups. The clown who wired it in mixed up the polarities on the one plug:scratch: Anyway car is running nicely now made some alright power for the current setup that is in the car. Atleast I can enjoy the car now that it is tuned properly:icon_tup: Car made 348hp at 13psi. Wanted a pump gas tune so we stopped the tuning at that boost Attachment 623532 Attachment 623533 Another pic from the wash meet the other day Attachment 623534 Nice and clean Attachment 623535 Attachment 623536 Attachment 623537 |
2 Attachment(s)
Christmas is coming early next week from USA :nod:
Got myself a Mazdaspeed cluster thanks to 7Speed on the forum here Pic stolen from rx7 boutique http://i1372.photobucket.com/albums/...pse94tp3wo.jpg I also ordered Hot Water labs Carbon reverse lights and a carbon bumper guard Pics stolen from HWL website Attachment 623530 Attachment 623531 Simon aka 7Speed is bringin the stuff through in his suitcase for me as he is coming here on holiday to South Africa. |
Cluster and carbon goodness
3 Attachment(s)
Got my cluster
Attachment 621452 Also got my carbon reverse lights and bumper guard Attachment 621453 Got my aftermarket fuel rails Attachment 621454 |
Rx7 gathering
1 Attachment(s)
|
3 Attachment(s)
Went to a car show the other day. Suspension felt terrible
Got home found this :bang: Poly bush popped out the rear control arm Attachment 621448 Got it fixed last week then my dad took it to adyno day on Saturday. Made 400hp at .9 bar boost great success.. howver short lived On the way home after a hard pull through the gears the bush popped out again Also bought some wheels from a mate of mine https://i1372.photobucket.com/albums...psgi00sagq.jpg Attachment 621449 Attachment 621450 |
9 Attachment(s)
Went to ODI yesterday it s a local abondoned irfield where we can do 400m and 1kilometre top end runs
Was a leka day out with the mates. Even better to put foot flat without worrying on speed fines haha Car went strong the whole day there and back long ass drive no issues besides the headache when I got home Car was boosting 0.9 bar yesterday and was running lovely. Got 223kmph on the 1km and 222kmph on the 2nd run Ran a 13.27 at 169kmph on the 400m Most fun ive had in a long time must definitely do it again. Only raced 4 wheel drive cars yesterday didnt do too bad next time some aviation fuel and higher boost for sure Attachment 621439 Attachment 621440 Attachment 621441 Attachment 621442 That ass doe Attachment 621443 Attachment 621444 Attachment 621445 Attachment 621446 Attachment 621447 |
10 Attachment(s)
|
7 Attachment(s)
|
1 Attachment(s)
Hi guys,
Not too much to update here Car has been running 14lb boost and is going nicely for a tiny t3 turbo on the car. Future plans will still include a way bigger turbo to make some proper power The FD is getting shot this weekend for a local online magazine Have been so busy with my new project gathering funds that the rx7 hasn't had much done to it recently just been enjoying driving it and waking up the neighbourhood My new project with the Rx7 Attachment 619692 |
8 Attachment(s)
A few more recent pics
Attachment 619684 A friends R33 GTR lurking in the basement parking Attachment 619685 Recent show held by a local performance magazine Attachment 619686 Attachment 619687 Attachment 619688 Attachment 619689 And 2 pics I took on my phone Attachment 619690 The money shot Attachment 619691 |
Car's looking sweet as ever man. You must link us when you get your feature!
|
Will send the link when it comes out Simon but will only be next year.
Recently fitted some Carbon Ganador super mirrors will upload some pics Also went to a local meetup of some of the elite cars in the car scene in JHB on Saturday awaiting some pics from that event. |
Great looking car! Love it!
Not sure if you're aware, but where your trailing arm connects to the lower control arm there should be a pillow-ball bushing and not a poly bushing. That's why its popping out like that. The pillow-ball bushing is held in by retention clips which keep it in place. Not sure if you put a poly bush there intentionally or by accident. |
Originally Posted by Spalato
(Post 11987920)
Great looking car! Love it!
Not sure if you're aware, but where your trailing arm connects to the lower control arm there should be a pillow-ball bushing and not a poly bushing. That's why its popping out like that. The pillow-ball bushing is held in by retention clips which keep it in place. Not sure if you put a poly bush there intentionally or by accident. |
7 Attachment(s)
So a small update
Some sneak peak shots of the shoot done the other day Attachment 618989 Attachment 618990 http://i1372.photobucket.com/albums/...psyf10hsou.jpg I took this pic and a mate edited it for me to look like I was smoking the tyres haha Attachment 618991 Recently got some carbon Ganador mirrors Attachment 618992 Fitted Attachment 618993 Attachment 618994 Sneak pic of another meet up photoshoot I went to on the weekend Attachment 618995 |
Just keeps getting better man, that other set of wheels looks sweet too! I'm surprised you haven't gotten a feature in one of the local car magazines/ sites yet. Keep it up
|
9 Attachment(s)
Had our Annual Rotory Show today at a local Race Track. Plenty cars arrived was a fun day out even got to do a few laps on the track.
Seriously need to build a race car now Some pics My car and the guy I bought my car form's series 6 race car Attachment 618919 Attachment 618920 Attachment 618921 20b FD Attachment 618922 4 rotor FD Attachment 618923 Attachment 618924 Attachment 618925 13b cosmo Rx8 Attachment 618926 Attachment 618927 |
5 Attachment(s)
Attachment 618914
Clean FC Attachment 618915 3 rotor NA race car Attachment 618916 Attachment 618917 Attachment 618918 |
4 Attachment(s)
Small update
Jap plate done Attachment 618771 Attachment 618772 http://i1372.photobucket.com/albums/...psr2fuloi2.jpg Got a new 38mm Turbosmart dual port BOV Attachment 618773 Attachment 618774 Next on the list is a new 60mm wastegate as well as a GT4202 turbo:icon_tup: |
2 Attachment(s)
Got my new twinscroll T4 manifold today :icon_tup:
Attachment 618674 Attachment 618675 Getting my new turbo sometime this week or next week, Then need to buy new wastegate then will send car in for new boost pipes and downpipe as well. Hope to make some proper power with new setup. Will change injectors, fuel rails, FPR, and add additional fuel pumps in the new year |
I must get more info on that boosted 4 rotor!!!
|
All times are GMT -5. The time now is 01:16 PM. |
© 2024 MH Sub I, LLC dba Internet Brands