Rx7 Wagon
#276
^Actually me, passing smog straight up the other week with zero trick-eration. Car is effectively bone stock, but that's not known to guarantee anything (and it looks wild enough).
Dude drove the crazy shifter like a boss. Think I figured out how to explain it to people on the first go...
Gearing up for a big drive, soon!
The following 4 users liked this post by Narfle:
#277
10000 RPM Lane
iTrader: (2)
^^
I have a 13B DCT conversion kit for later down the road when an REW conversion takes place, different chassis for competition use. The CD009 is just to provide drivetrain reliability on the current test mule chassis.
They have their own issues though. Hoping by then things are a bit more settled on the electronics and such. Haven’t invested in those or the DCT itself yet.
.
Are you set on CD009? That seems like a good choice. Have you seen the video of the 20b setup with the DCT?
https://www.youtube.com/watch?v=0AZzjQTV-F4
Kinda blows my mind. It's like a dog box without all the regret.
https://www.youtube.com/watch?v=0AZzjQTV-F4
Kinda blows my mind. It's like a dog box without all the regret.
I have a 13B DCT conversion kit for later down the road when an REW conversion takes place, different chassis for competition use. The CD009 is just to provide drivetrain reliability on the current test mule chassis.
They have their own issues though. Hoping by then things are a bit more settled on the electronics and such. Haven’t invested in those or the DCT itself yet.
.
The following users liked this post:
Narfle (02-23-22)
#278
Ok, fam. I lucked into a set of mu-len mazdaspeed seat brackets. Now we just have to find a nice set of the black mazdaspeed seats...And avoid buying the black rz kevlar buckets I probably wouldn't fit in, anyways. One side from Australia, one side from Denmark.
Last edited by Narfle; 03-04-22 at 10:34 AM.
The following users liked this post:
ZE Power MX6 (03-03-22)
#279
Hmm, eclectic photo journey...
1. I really like weird steering wheels, apparently.
2. I put some of my "coolest" stuff on one of my most useless shelves. Synergy.
3. @GoodfellaFD3S hooked me up with the GReddy front bar, to match my GReddy rear bar, to match my GReddy hatch. OG Triple. Got more plugs than a surge protector.
(I would never replace these with the perfect MS bar set, and I don't know why you asked. Very rude, sir.)
4. I also really like colorful, useless, period correct seatbelt pads. GReddy all the things.
5. See? They're like beanie babies, except very JDM and manly and not at all weird. You're weird for thinking it's weird. Weirdo.
6. This is not over.
1. I really like weird steering wheels, apparently.
2. I put some of my "coolest" stuff on one of my most useless shelves. Synergy.
3. @GoodfellaFD3S hooked me up with the GReddy front bar, to match my GReddy rear bar, to match my GReddy hatch. OG Triple. Got more plugs than a surge protector.
(I would never replace these with the perfect MS bar set, and I don't know why you asked. Very rude, sir.)
4. I also really like colorful, useless, period correct seatbelt pads. GReddy all the things.
5. See? They're like beanie babies, except very JDM and manly and not at all weird. You're weird for thinking it's weird. Weirdo.
6. This is not over.
The following 2 users liked this post by Narfle:
Akomix (03-11-22),
GoodfellaFD3S (03-11-22)
#280
1. Remember the Ikeya formula part-shifter I got? I really wanted it for this straight handle.
Managed to switch the levers (as suspected, these handles are swappable).
Wow the straight one is a big improvement for me. Now I just need to figure out what **** to use. I have a longer ikeya style one (seen previously). Or, a big purple crystal one? Or, a beer tap? Ya buddy.
2. I got my parole officer a pretty-nice SLR for xmas (like entry-level, camera's get serious fast)
Anyways, it ought to take better photos than my phone.
Here's one. Car is dirty. Living life like a real car.
Managed to switch the levers (as suspected, these handles are swappable).
Wow the straight one is a big improvement for me. Now I just need to figure out what **** to use. I have a longer ikeya style one (seen previously). Or, a big purple crystal one? Or, a beer tap? Ya buddy.
2. I got my parole officer a pretty-nice SLR for xmas (like entry-level, camera's get serious fast)
Anyways, it ought to take better photos than my phone.
Here's one. Car is dirty. Living life like a real car.
The following 2 users liked this post by Narfle:
DaleClark (03-14-22),
Molotovman (03-15-22)
#281
Rotary Motoring
iTrader: (9)
Shift ***** for Sequenshifter are a pain because they dont use any standard shift **** thread.
There are some industrial machine ***** that fit, but I didnt find any sporty looking ones (go figure).
I bought a helicoil kit with the Sequenshifter threads so I could convert any **** by drilling it and inserting the helicoil.
The latest I got is NRG baton which is adjustable length. Plan is to cut down the aluminum threaded insert so I have a nice light hollow CF shift ****.
I dislike NRG as they are knock-off company. I might deface it in other ways before installing. I think the hollow drilled Wevo ***** look cool.
There are some industrial machine ***** that fit, but I didnt find any sporty looking ones (go figure).
I bought a helicoil kit with the Sequenshifter threads so I could convert any **** by drilling it and inserting the helicoil.
The latest I got is NRG baton which is adjustable length. Plan is to cut down the aluminum threaded insert so I have a nice light hollow CF shift ****.
I dislike NRG as they are knock-off company. I might deface it in other ways before installing. I think the hollow drilled Wevo ***** look cool.
The following users liked this post:
Narfle (03-15-22)
#282
In the meanwhile, I threw the other, longer Ikeya handle on there just to try it. Looks fun. Haven't driven it yet. I liked the short one fine. Maybe I can wrap this in hockey grip tape and make it look like a sword handle? Beers.
In other news, the car hasn't gotten out much for a while because
1) I'm a slow mechanic, and that's kind of me to say
2) Smog, not to be confused with Smaug though both have been slain now
3) The Jabronis who balanced my wheels and tires really boned it up
Anyways, a much more regular tire and wheel place did a much more regular job of balancing the tires on my less regular car.
Although, this fella had a less confident experience with the final-boss shifter. That's on me.
So, now we just wash it. Go on the big drive. Take some pictures (and some emergency equipment). And, pray.
And, since we're talking about beer. I just wanted to mention the best beer of them all. Miller High Life. Which, is the Champagne of Beers. And, if you didn't know Champagne is basically the Beer of Wines. So, they know their ****.
Last edited by Narfle; 03-17-22 at 11:41 PM.
The following users liked this post:
ZE Power MX6 (03-18-22)
#285
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,901
Received 2,644 Likes
on
1,873 Posts
#286
Had a great time at the rally. Met lots of cool folks with awesome rides. Car ran great all day. Lots of pictures to sort through. I'll be sure to share.
1. Loaded up the night before. Took a ton of tools, just in case something came loose on the big shakedown. Nothing did. This time...
2. Fueled up. I run on ethanol, but the car doesn't yet.
3. Rode around with some cool cars almost as fast as I wanted to, and very nearly didn't get lost on the way. Next time, copilot promised to deliver concise AND condescending pro-rally-style driving instructions.
These extremely precise gauges will let you know the exact moment you need to re-plan your financial future. Down to the millisecond.
Post more pictures of other people's cars later.
You in California? All the smog machines are tip top out here!
1. Loaded up the night before. Took a ton of tools, just in case something came loose on the big shakedown. Nothing did. This time...
2. Fueled up. I run on ethanol, but the car doesn't yet.
3. Rode around with some cool cars almost as fast as I wanted to, and very nearly didn't get lost on the way. Next time, copilot promised to deliver concise AND condescending pro-rally-style driving instructions.
These extremely precise gauges will let you know the exact moment you need to re-plan your financial future. Down to the millisecond.
Post more pictures of other people's cars later.
You in California? All the smog machines are tip top out here!
#287
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,901
Received 2,644 Likes
on
1,873 Posts
#288
Here's a few pictures of the meet.
It rained a little bit in the morning. There were about half a dozen FD's and a few RX-8's at the meet. All cool people, some from here too.
By mid-morning, the weather was nice. And, we ended up at the raceway paddocks. Some serious hardware was out there.
I took a bunch of pictures, but like 10% of them are good enough to share. I think I have some more.
But, for now check out some of the cool rides that were out there. Looking forward to doing more similar stuff!
It rained a little bit in the morning. There were about half a dozen FD's and a few RX-8's at the meet. All cool people, some from here too.
By mid-morning, the weather was nice. And, we ended up at the raceway paddocks. Some serious hardware was out there.
I took a bunch of pictures, but like 10% of them are good enough to share. I think I have some more.
But, for now check out some of the cool rides that were out there. Looking forward to doing more similar stuff!
The following 5 users liked this post by Narfle:
Akomix (06-27-22),
estevan62274 (03-21-22),
j9fd3s (03-21-22),
neit_jnf (03-21-22),
XanderCage (03-22-22)
The following 3 users liked this post by Narfle:
The following users liked this post:
Narfle (07-29-22)
#294
Built Not Bought
iTrader: (14)
Random question, I'm trying to build a square setup of MS-02. Taking 4 rear wheels at 9"+38.
Tons of threads on tire fitment, always lots of contradictions with some saying it works and some saying a role is needed. Mine are already rolled so not a problem.
But curious, do you think your rears would fit on your front without issue?
Tons of threads on tire fitment, always lots of contradictions with some saying it works and some saying a role is needed. Mine are already rolled so not a problem.
But curious, do you think your rears would fit on your front without issue?
The following users liked this post:
Narfle (08-01-22)
#295
The people I've seen do it say that it works no problem. It's not an aggressive front fitment, but I suspect you'd want a roll and to tuck the fender wire harness higher (if you want to run low-ish or drive real hard).
Depends on the tires and spring rates kindof, too. I suspect you'd run 255's all around? Stiff springs keep the rubs away too.
Depends on the tires and spring rates kindof, too. I suspect you'd run 255's all around? Stiff springs keep the rubs away too.
#296
Carpet
dis you pull this carpet out of another fd ? If not did it fit well, and where do I get one?
So the interior on this car is a little ratty, and needs some freshening up.
I thought about switching to black carpet, but
1. They're hard to come by
2. I already had a very nice tan carpet
3. I actually kindof like the tan, it's classy
Getting everything out was a pretty big PITA, but finally got the new carpet in. Found a buttload of change under the old carpet.
No more holes! Now I'm just working my way back out, and hope to have some quick progress soon.
Definitely going to be rocking floor mats, and in the market for some new seats.
Anyone know how to test out the heater core?
I thought about switching to black carpet, but
1. They're hard to come by
2. I already had a very nice tan carpet
3. I actually kindof like the tan, it's classy
Getting everything out was a pretty big PITA, but finally got the new carpet in. Found a buttload of change under the old carpet.
No more holes! Now I'm just working my way back out, and hope to have some quick progress soon.
Definitely going to be rocking floor mats, and in the market for some new seats.
Anyone know how to test out the heater core?
#297
For the non-oem carpet, I hear it actually fits nicely if you have some padding/foam and are handy with a cutting tool. IIRC, people said cutting it down the middle helped.
I found a couple threads on the aftermarket carpet:
https://www.rx7club.com/3rd-gen-gene...tions-1152765/
https://www.rx7club.com/2nd-generati...ience-1116721/
I thought I heard you could still get this. But, if possible I do recommend used-OEM. The quality and fitment is best.
#298
Been slacking on my forum game. Been enjoying the car. Took it to show at Radwood Norcal, where we had an awesome time checking out cool rides and meeting great people.
We were totally stoked and surprised to win Raddest Import. We're getting out to more shows, and I'll eventually post up some more photos and progress.
The following 4 users liked this post by Narfle:
#299
Ooo. Almost forgot. Located and installed the old school MS seats I was dreaming of.
Sorry for the crappy pic (makes it look like there's a spot on the driver's side). But, they're pretty flawless, considering the vintage. I liked the base seats a lot (keeping them boxed up, just in case), and I was worried these wouldn't be as comfy. But, after putting some miles in them, they're plenty comfortable and supportive. I heard they sit higher, but I sit fine in the car even though I'm a relatively tall person. My biggest gripe is that the recline adjustment is hard to reach, while seated. But it's mostly set it and forget it, once you're comfy.
I still look at the black Recaro RZ seats on sale, but I'm not sure I'm skinny enough to fit in them. It's so hard to find a nice matching pair of the RZ seats, too. My better half really likes the gaudy livery on these old MS Mu-Len seats (so do I, it's why we got them). Just too cool. We had a shot at some other seats, but she approves none but these, so far.
So, unless we totally change directions with the car (have another build concept in my mind, but we're not done with this one by any stretch), I think these are my forever seats.
#300
Whew. Still on vacation and had some down time to go through pictures for sharing.
After Radwood Norcal, we went to a Radhause car show (no affiliation of radness, I think...).
In any case, there were lots of cool rides and people there, too. Different scene and setting.
I feel like it was hard to get good photos in the underground garage, but also I'm still not a very good photographer (yet!).
Need to click buy on the next round of parts and maybe sell some of the parts hoard which wouldn't or couldn't be used with me. Trying to send neat/rare/strange parts back into the community at reasonable prices, when I have the chance. It's hard to let go!