My 3rdgen, built and lots O pics and videos :D
#1
Senior Member
Thread Starter
My 3rdgen, built and lots O pics and videos :D
so bought the car cheap and wanted something original so i went the good ol 3d gen route and here we go
comming off the truck from the purchase of the car to mechanic
about to be rolled in
blow motor
interior shot with the new nardi wheel and air bag like the jdm one
picked up a gato performance manifold on the cheapy cheap
hanging out waiting for parts
nib borg warner s360...and yes thats my hairy yeti legs lol
comming off the truck from the purchase of the car to mechanic
about to be rolled in
blow motor
interior shot with the new nardi wheel and air bag like the jdm one
picked up a gato performance manifold on the cheapy cheap
hanging out waiting for parts
nib borg warner s360...and yes thats my hairy yeti legs lol
#2
Senior Member
Thread Starter
#4
Senior Member
Thread Starter
engine bay done
now time to dyno waiting to get on
another shot noticed i changed the head lights i found a guy online selling them
with the same color car so i swapped the stockie back on
new headlights
a little touch up paint from autozone till i get a paint job
#6
Senior Member
Thread Starter
when its all said and done it put down 440 to the wheels but i could only find the paper
that did the 435 run oh well
ok so the car was riding like **** so i went ahead and got some bc racing damper kit
#7
Senior Member
Thread Starter
and i got myself some used wheels cheap
so after suspension and wheels were installed these are the pics i came back to
when i was told the car was ready
Trending Topics
#10
Senior Member
Thread Starter
ok so now after having the power ive had and its not feeling very fast anymore
i went with a bigger turbo and more goodies....i want to be around 500hp sooo will after new dyno
NEW TURBO INSTALLED!!!!!
and now for the goodies
i went with a bigger turbo and more goodies....i want to be around 500hp sooo will after new dyno
NEW TURBO INSTALLED!!!!!
and now for the goodies
#23
Can you post up some details about your AFR and timing? I just don't get why it's so low.
#25
Senior Member
Thread Starter
one thing i can tell you my engine just blew not to happy about that i knew 24 pounds was too much oh well its getting rebuilt so will see what happens i want to keep it at 20 psi or lower