MB stock build. EXPERTS HELP!
03-09-12, 01:16 AM
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Dec 2011
Location: VA
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
MB stock build. EXPERTS HELP!
Some history. I picked this car up in pieces so i am returning it back to stock. I have about 90% of this car complete. I got the engine missing a bunch of stuff ie fuel rails LIM bunch of nuts bolts gaskets missing. Ray crowe has helped me source almost everything i was missing 
the car came with non-sequential twin turbos ive simplified the vacuum lines. All i need is fluids and an engine harness and she's running 
My question though is can the center iron be modified to to fit aftermarket injectors. Like either a adapter or sleeve pressed into the center iron? I cant get my primary fuel rail and injectors to seat properly ie all the way down and flush. Ray gave me the correct diffusers and o-rings for my set-up. Do i not have the right fuel rail? This is my first rotary build its not terribly difficult this site has almost all thrninformation you need but i just dont have enough experience with them. Here is some pictures.
the car came with non-sequential twin turbos ive simplified the vacuum lines. All i need is fluids and an engine harness and she's running My question though is can the center iron be modified to to fit aftermarket injectors. Like either a adapter or sleeve pressed into the center iron? I cant get my primary fuel rail and injectors to seat properly ie all the way down and flush. Ray gave me the correct diffusers and o-rings for my set-up. Do i not have the right fuel rail? This is my first rotary build its not terribly difficult this site has almost all thrninformation you need but i just dont have enough experience with them. Here is some pictures.
Thread
Thread Starter
Forum
Replies
Last Post