Build Threads The place to discuss complete builds

Built For Street BNR

Old 05-10-12 | 10:21 PM
  #1  
NW Rx7's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2010
Posts: 36
Likes: 0
From: Washington
Built For Street BNR

Im getting my car back tomorrow and want to get this page goin to get some feedback.

The bay is all new including turbos, wiring harness, housings, etc.
Attached Thumbnails Built For Street BNR-tear-down-7.jpg   Built For Street BNR-build-1-resized.jpg   Built For Street BNR-build-2-resized.jpg  
Old 06-19-12 | 02:37 AM
  #2  
NW Rx7's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2010
Posts: 36
Likes: 0
From: Washington
Build Specs:

Street ported and balanced
Bnr stage 3 non sequential
Power fc
550cc and 1300cc with factory rails and fpd
ETS 3" fmic with Greddy elbow
Koyo
Pettit intake (planning on contacting garage autohero for custom box)
3" turbo back with RacingBeat Catback
Stance coils
Kaaz 1.5way

Built and tuned at Garage Boso
good for 330whp on dynapac

More to come as far as cooling and braking
Old 06-19-12 | 02:39 AM
  #3  
NW Rx7's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2010
Posts: 36
Likes: 0
From: Washington
here are a couple pics at a local body dump site
Attached Thumbnails Built For Street BNR-bum-hut-hood-down.jpg   Built For Street BNR-hood-up-bum-hut.jpg  
Old 06-25-12 | 10:30 AM
  #4  
XLR8's Avatar
Eats, Sleeps, Dreams Rotary
iTrader: (52)
 
Joined: Oct 2001
Posts: 3,902
Likes: 10
From: NJ
Looks good. Love MB of course

Suggestions:
-Remove that OEM Air Separation Tank. Delete or replace with a metal unit.

-Upgrade that turbo pipe to a metal polished unit.

-Ceramichrome that Upper intake manifold. Adds bling and protects against heat. Will add a nice flow with the other polished parts. http://www.irperformance.com/service...ance-coatings/

-Add water injection. Even if you don't plan to tune for it. EVERY rotary engine will benefit from a simple switched water injection system. Reduce knock, intake temps, and steam clean your engine internals. Makes everything happy.
Old 07-02-12 | 01:36 AM
  #5  
NW Rx7's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2010
Posts: 36
Likes: 0
From: Washington
Originally Posted by XLR8
Looks good. Love MB of course

Suggestions:
-Remove that OEM Air Separation Tank. Delete or replace with a metal unit.

-Upgrade that turbo pipe to a metal polished unit.

-Ceramichrome that Upper intake manifold. Adds bling and protects against heat. Will add a nice flow with the other polished parts. http://www.irperformance.com/service...ance-coatings/

-Add water injection. Even if you don't plan to tune for it. EVERY rotary engine will benefit from a simple switched water injection system. Reduce knock, intake temps, and steam clean your engine internals. Makes everything happy.
Hey thanks, I wish I had a wheel setup like you got, what's the fitment?


I'm one step ahead of you,
-ordered a new Oem tank(one popped up in my area)
-plan on having a crossover pipe custom made with an enclosed air box with ducting( garage autohero)

As far as the water injection can you run that on an existing tune? I plan on doing co2 sprayers on a throttle input hence the enclosed box.

Hope to hear more info and I plan on Posting pics this week
Old 07-08-12 | 08:09 PM
  #6  
lpolo69's Avatar
Junior Member
iTrader: (1)
 
Joined: Jun 2012
Posts: 18
Likes: 0
From: Naperville
Ive always loved that Blue on the fd's
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MILOS7
3rd Generation Specific (1993-2002)
0
09-16-15 06:34 AM
SCinfidel
3rd Generation Specific (1993-2002)
4
09-08-15 05:36 PM


Thread Tools
Search this Thread
Quick Reply: Built For Street BNR



All times are GMT -5. The time now is 06:17 PM.