RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   Build Threads (https://www.rx7club.com/build-threads-292/)
-   -   Built For Street BNR (https://www.rx7club.com/build-threads-292/built-street-bnr-998026/)

NW Rx7 05-10-12 10:21 PM

Built For Street BNR
 
3 Attachment(s)
Im getting my car back tomorrow and want to get this page goin to get some feedback.

The bay is all new including turbos, wiring harness, housings, etc.

NW Rx7 06-19-12 02:37 AM

Build Specs:

Street ported and balanced
Bnr stage 3 non sequential
Power fc
550cc and 1300cc with factory rails and fpd
ETS 3" fmic with Greddy elbow
Koyo
Pettit intake (planning on contacting garage autohero for custom box)
3" turbo back with RacingBeat Catback
Stance coils
Kaaz 1.5way

Built and tuned at Garage Boso
good for 330whp on dynapac

More to come as far as cooling and braking

NW Rx7 06-19-12 02:39 AM

1 Attachment(s)
here are a couple pics at a local body dump site

XLR8 06-25-12 10:30 AM

Looks good. Love MB of course ;)

Suggestions:
-Remove that OEM Air Separation Tank. Delete or replace with a metal unit.

-Upgrade that turbo pipe to a metal polished unit.

-Ceramichrome that Upper intake manifold. Adds bling and protects against heat. Will add a nice flow with the other polished parts. http://www.irperformance.com/service...ance-coatings/

-Add water injection. Even if you don't plan to tune for it. EVERY rotary engine will benefit from a simple switched water injection system. Reduce knock, intake temps, and steam clean your engine internals. Makes everything happy.

NW Rx7 07-02-12 01:36 AM


Originally Posted by XLR8 (Post 11136336)
Looks good. Love MB of course ;)

Suggestions:
-Remove that OEM Air Separation Tank. Delete or replace with a metal unit.

-Upgrade that turbo pipe to a metal polished unit.

-Ceramichrome that Upper intake manifold. Adds bling and protects against heat. Will add a nice flow with the other polished parts. http://www.irperformance.com/service...ance-coatings/

-Add water injection. Even if you don't plan to tune for it. EVERY rotary engine will benefit from a simple switched water injection system. Reduce knock, intake temps, and steam clean your engine internals. Makes everything happy.

Hey thanks, I wish I had a wheel setup like you got, what's the fitment?


I'm one step ahead of you,
-ordered a new Oem tank(one popped up in my area)
-plan on having a crossover pipe custom made with an enclosed air box with ducting( garage autohero)

As far as the water injection can you run that on an existing tune? I plan on doing co2 sprayers on a throttle input hence the enclosed box.

Hope to hear more info and I plan on Posting pics this week

lpolo69 07-08-12 08:09 PM

Ive always loved that Blue on the fd's


All times are GMT -5. The time now is 06:33 PM.


© 2024 MH Sub I, LLC dba Internet Brands