Air atomizing nozzle???
#1
Rotary Enthusiast
Thread Starter
iTrader: (17)
Join Date: Dec 2007
Location: Texas
Posts: 785
Likes: 0
Received 0 Likes
on
0 Posts
Air atomizing nozzle???
I have been looking for two weeks trying to buy a single air atomizing nozzle so I can build a water injection kit that does not require the use of a pump. Does anyone have a direct link or one for sale or do I have to bite the bullet and buy one from ispray and drill it out. I will only be running a max of 18 psi possibly. Thanks in advance for the help.
#4
Eats, Sleeps, Dreams Rotary
iTrader: (52)
If your pump driven system doesn't work out, PM me. I have a part number for an adjustable atomizer that will work perfectly. Flows up to 900cc at 21psi. Building my own system as well.
I am thoroughly sold on the manual pre-turbo setup utilized by Rice Racing and Wannaspeed. I simply want to design my own kit.
I am thoroughly sold on the manual pre-turbo setup utilized by Rice Racing and Wannaspeed. I simply want to design my own kit.
#5
Rotary Enthusiast
Thread Starter
iTrader: (17)
Join Date: Dec 2007
Location: Texas
Posts: 785
Likes: 0
Received 0 Likes
on
0 Posts
I would have loved to build a manual system but I could not find the necessary parts to build that kind myself or afford to pay over $300 for it from wannaspeed. I'm running close to 1 bar of boost and it seems to be working wonderfully. My needs were met, although the atomization is not as fine as the manual kit. Still I have no complaints or can't say which one is better. I only can say they both work and that's the main think anyone is looking for in my opinion. My setup is a high compression s4 6 port engine with a hyrbid turbo. Still going strong with plans of upping the boost even more.
#6
Eats, Sleeps, Dreams Rotary
iTrader: (52)
I would have loved to build a manual system but I could not find the necessary parts to build that kind myself or afford to pay over $300 for it from wannaspeed. I'm running close to 1 bar of boost and it seems to be working wonderfully. My needs were met, although the atomization is not as fine as the manual kit. Still I have no complaints or can't say which one is better. I only can say they both work and that's the main think anyone is looking for in my opinion. My setup is a high compression s4 6 port engine with a hyrbid turbo. Still going strong with plans of upping the boost even more.
I also plan to incorporate the Aquamist DDS3 V10 failsafe and flow monitor system.
#7
Full Member
I wish someone would make nozzles for them small enough to be used with a pump to further reduce particle size. I have tried contacting both sellers that I have found here without much information.
Trending Topics
#8
D.I.L.U.S.I.
iTrader: (5)
Join Date: Nov 2002
Location: L-Town pa
Posts: 2,051
Likes: 0
Received 0 Likes
on
0 Posts
If your pump driven system doesn't work out, PM me. I have a part number for an adjustable atomizer that will work perfectly. Flows up to 900cc at 21psi. Building my own system as well.
I am thoroughly sold on the manual pre-turbo setup utilized by Rice Racing and Wannaspeed. I simply want to design my own kit.
I am thoroughly sold on the manual pre-turbo setup utilized by Rice Racing and Wannaspeed. I simply want to design my own kit.
Thread
Thread Starter
Forum
Replies
Last Post
Shainiac
Single Turbo RX-7's
12
07-17-19 02:20 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM