Mictrotech
Junior Member
Joined: Apr 2005
Posts: 25
Likes: 0
From: Australia
contact Jon from rx engineering he is the microtech guru
www.rxengineering.com
if you have a fd why dont you just get a power fc....most of us in aus use them and they're great!!!
www.rxengineering.com
if you have a fd why dont you just get a power fc....most of us in aus use them and they're great!!!
Thread Starter
Custom FD
Joined: Feb 2006
Posts: 82
Likes: 0
From: New Zealand
I was running Power FC on my previous setup and have now steped it up again to the next level and the Power FC will limit what i can do, which is a shame as they are a very good computer.
Thanks for the link
Thanks for the link
Originally Posted by IBL17Z
contact Jon from rx engineering he is the microtech guru
www.rxengineering.com
if you have a fd why dont you just get a power fc....most of us in aus use them and they're great!!!
www.rxengineering.com
if you have a fd why dont you just get a power fc....most of us in aus use them and they're great!!!
Banned. I got OWNED!!!
Joined: Mar 2001
Posts: 2,306
Likes: 1
From: lebanon
Originally Posted by Tremer
I was running Power FC on my previous setup and have now steped it up again to the next level and the Power FC will limit what i can do, which is a shame as they are a very good computer.
Thanks for the link
Thanks for the link
You can put a 5 bar map sensor on your PFC (if you need it!)
You can run 4 x 1700cc injectors
You have a fuel temp input
You have full OMP control
There is no limit to the power level you can run
You have full proper data logging (via data logit), not toy type quality as on microwrek
But if you want to turn your FD into **** then by all means go right ahead
From 255bhp *stock* to 850bhp *race car* there is nothing the PFC wont do better than any other computer you care to mention, I know I've used/tuned most of them
Junior Member
Joined: Apr 2005
Posts: 24
Likes: 0
From: Brisbane Aust.
Originally Posted by RICE RACING
Your ******* joking me right?
You can put a 5 bar map sensor on your PFC (if you need it!)
You can run 4 x 1700cc injectors
You have a fuel temp input
You have full OMP control
There is no limit to the power level you can run
You have full proper data logging (via data logit), not toy type quality as on microwrek
But if you want to turn your FD into **** then by all means go right ahead
From 255bhp *stock* to 850bhp *race car* there is nothing the PFC wont do better than any other computer you care to mention, I know I've used/tuned most of them
You can put a 5 bar map sensor on your PFC (if you need it!)
You can run 4 x 1700cc injectors
You have a fuel temp input
You have full OMP control
There is no limit to the power level you can run
You have full proper data logging (via data logit), not toy type quality as on microwrek
But if you want to turn your FD into **** then by all means go right ahead
From 255bhp *stock* to 850bhp *race car* there is nothing the PFC wont do better than any other computer you care to mention, I know I've used/tuned most of them
Has anyone run Drive by wire on an FD race engine?
Thread
Thread Starter
Forum
Replies
Last Post