Bebesito21

I want to use a pair of 1600cc injectors and tune them with the boost control map on the AEM EMS, but it asks for the frequency of the injectors. How can i find out what frequency my injectors are? By the way, they are Motorcraft High Imp. top feed 1600cc, pn XL3Z9F593CA

Bebesito21

ok, lets see if i can explain this. My friend is using an AEM EMS on his 3rd gen RX7. He wants to control a third set of 1600cc injectors but there is no way to control a 3rd set, so he was going to have them fire based on the boost. More boost, more fuel. The thing is, its asking for the frequency of the injectors or something like that. So, basically, if you can tell me some way to control the 3rd set, not tied to the secondary injectors, based on boost, id appreciate it.

Bebesito21

ok, lets see if i can explain this. My friend is using an AEM EMS on his 3rd gen RX7. He wants to control a third set of 1600cc injectors but there is no way to control a 3rd set, so he was going to have them fire based on the boost. More boost, more fuel. The thing is, its asking for the frequency of the injectors or something like that. So, basically, if you can tell me some way to control the 3rd set, not tied to the secondary injectors, based on boost, id appreciate it.

DCrosby

The AEM forum is a better place to ask, since most of us are still learning how to controll the stock setup..

-DC

www.aempower.com click on forum in the top right hand corner