XS POWER Intercooler arrived today!!!
03-02-06, 06:01 PM
#27
Out of the game
iTrader: (1)
Join Date: Dec 2004
Location: Reno NV
Posts: 637
Likes: 0
Received 0 Likes
on
0 Posts
To answer your question
Originally Posted by M14socom
Where can I find this intercooler, because I was looking at paying around 900 for a good intercooler. Is it stock mounted position or is a front mount? Got any pictures?
EBAY. Just type in FD3S, rx7, RX-7 etc... They're selling them by the pound on there. Can't miss em.
12-30-06, 11:19 AM
#29
Senior Member
iTrader: (1)
Join Date: Jul 2005
Location: Katy Tx
Posts: 376
Likes: 0
Received 0 Likes
on
0 Posts
hey did ya'lls xs intercoolers come with the mounting tabs or did you ahve to fab yours? i got mine. but it's only got the tab for the AST tank. and also did you have to modify the body brace that goes under the SMIC and battery? I'm having a little trouble with mine 
Los
Thansk!
Los
Thansk!
12-30-06, 01:50 PM
#30
Avoid Fuego Racing
Aftermarket SMIC's don't bolt in. They are held in place by the piping. You will need to take all the crap off the crossbar, it's all there for the stock airboc and IC anyway.
01-01-07, 01:24 AM
#34
There is tons of info on this intercooler. Just search. There was someone on this forum making ducts. I bought one. Seems to work just fine. I have also read that you can buy a duct from Pettit that they sell with their intercooler kit. I am guessing that it is around $100. YOU NEED A DUCT!
I have this intercooler in my car with the non Pettit duct I mentioned above.
It will work with a Greddy elbow. You will just need to have a pipe bent to fit. I have a straight pipe running from the intercooler to the Greddy elbow. Mine has not been perfected yet though. I think I need a longer coupler because I keep popping the coupler off.
Getting the stock duct out is a bit of a challenge if you want to keep the A/C, but it will come out without cutting. You just need to slightly bend the A/C piping and wrestle with the duct to get it out.
Also, if you have the Greddy pipe kit, you can rotate the S pipe that connects to the crossover pipe and it will work instead of using the pipe (with the BOV flange) that comes with the kit. If you go this route, you can keep your air pump and stock BOV.
I have seen pics of people using the pipe with the BOV flange though. It does work with a strut tower bar and air pump.
As for an intake, I used the Blitz intake pipes (I bought on eBay) with a pair of K&N fliters. Works great! If you search, you can get the part numbers for these. The intercooler will not work with a stock airbox.
You will also need a small filter for the intake hose on the air pump if you use the K&N filter method.
As far as bolting the intercooler down, there aren't any tabs to do so. The intercooler pipes should keep it in place. Mine tends to shift under boost, so I plan on doing something to fix this.
Let me know if you have any more questions about this intercooler. Overall I am very happy with it.
If you question how well it works, take the car out for a ride. Afterwards, put your hands on the intake side of the intercooler. Then touch the output side of the intercooler. The intake side will be very hot to touch. The intake side is very cool. I know this is very unscientific, but it shows you how well the unit works.
I know I will get a bunch of **** for this, but why spend a grand on the other intercoolers when this one works as well as it does. How much R&D do you really need for an intercooler? It's a fricken raditaor for air for goodness sakes! Really, I always wondered why intercoolers were so expensive for so many years!
I have this intercooler in my car with the non Pettit duct I mentioned above.
It will work with a Greddy elbow. You will just need to have a pipe bent to fit. I have a straight pipe running from the intercooler to the Greddy elbow. Mine has not been perfected yet though. I think I need a longer coupler because I keep popping the coupler off.
Getting the stock duct out is a bit of a challenge if you want to keep the A/C, but it will come out without cutting. You just need to slightly bend the A/C piping and wrestle with the duct to get it out.
Also, if you have the Greddy pipe kit, you can rotate the S pipe that connects to the crossover pipe and it will work instead of using the pipe (with the BOV flange) that comes with the kit. If you go this route, you can keep your air pump and stock BOV.
I have seen pics of people using the pipe with the BOV flange though. It does work with a strut tower bar and air pump.
As for an intake, I used the Blitz intake pipes (I bought on eBay) with a pair of K&N fliters. Works great! If you search, you can get the part numbers for these. The intercooler will not work with a stock airbox.
You will also need a small filter for the intake hose on the air pump if you use the K&N filter method.
As far as bolting the intercooler down, there aren't any tabs to do so. The intercooler pipes should keep it in place. Mine tends to shift under boost, so I plan on doing something to fix this.
Let me know if you have any more questions about this intercooler. Overall I am very happy with it.
If you question how well it works, take the car out for a ride. Afterwards, put your hands on the intake side of the intercooler. Then touch the output side of the intercooler. The intake side will be very hot to touch. The intake side is very cool. I know this is very unscientific, but it shows you how well the unit works.
I know I will get a bunch of **** for this, but why spend a grand on the other intercoolers when this one works as well as it does. How much R&D do you really need for an intercooler? It's a fricken raditaor for air for goodness sakes! Really, I always wondered why intercoolers were so expensive for so many years!
01-01-07, 03:49 PM
#35
So I was in the market for a pulley kit and I guess this guy had been trying to get rid of this intercooler and noone was really fealin it. He had it posted for 150 ended up dropping the price to 125 then to 100 then just by chance the same day I put in a search for a greddy pulley kit he mentioned in his add that he would give the pulley kit brand new for free if some one just bought the intercooler well new the pulley kit is 85 or so bucks so i figured whatever 15 bucks for an intercooler cant be that bad. Long story short i went to pick up the pulley kit didnt even look in the boxxes when I got home I was very surprised to see the quality of the pieces not to mention all the couplers included and all t-bolt clamps. So I ended up picking up a pulley kit, complete intercooler kit and a 3inch mid pipe he threw in for 100. Still waiting on the body shop so i can get everything I have bought put in should be interesting.
01-01-07, 04:01 PM
#36
Senior Member
Join Date: May 2005
Location: Francisco, CA
Posts: 569
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by twomucboost4u
So I was in the market for a pulley kit and I guess this guy had been trying to get rid of this intercooler and noone was really fealin it. He had it posted for 150 ended up dropping the price to 125 then to 100 then just by chance the same day I put in a search for a greddy pulley kit he mentioned in his add that he would give the pulley kit brand new for free if some one just bought the intercooler well new the pulley kit is 85 or so bucks so i figured whatever 15 bucks for an intercooler cant be that bad. Long story short i went to pick up the pulley kit didnt even look in the boxxes when I got home I was very surprised to see the quality of the pieces not to mention all the couplers included and all t-bolt clamps. So I ended up picking up a pulley kit, complete intercooler kit and a 3inch mid pipe he threw in for 100. Still waiting on the body shop so i can get everything I have bought put in should be interesting.
Wow, what a deal. That guy was begging to get rid of them...
01-01-07, 04:06 PM
#37
Just wanted to toss my name out there, I am the one that is building the XS Power intercooler ducts.
The work really well with these kits.
The ducts are welded with 18g alum and then painted black, unless you dont want it painted.
They are 125 + 20 flat shipping
Here are a few questions i get asked alot.
Will this work with the piping that comes with the Kit. YES
Is there any cutting on the frame or other.. NO
Will this work with KOYO and Fluidyne Rads...YES I run KOYO
Will this work with the stock fog lights.. YES/NO There is a small mod to make the foglights fit agian
Does the XS Power Intercooler fit with aftermarket air intakes..NO But i am working on a new True Cold Air Box for these
Here are the True Cold Air Intake that i am building, Just about 1 week before i start selling these. All you will need is the Air Filters and the Piping.
These are proably going to be 50 Dollars plus Shipping for the frist 10 or so then they are going to be 65
The work really well with these kits.
The ducts are welded with 18g alum and then painted black, unless you dont want it painted.
They are 125 + 20 flat shipping
Here are a few questions i get asked alot.
Will this work with the piping that comes with the Kit. YES
Is there any cutting on the frame or other.. NO
Will this work with KOYO and Fluidyne Rads...YES I run KOYO
Will this work with the stock fog lights.. YES/NO There is a small mod to make the foglights fit agian
Does the XS Power Intercooler fit with aftermarket air intakes..NO But i am working on a new True Cold Air Box for these
Here are the True Cold Air Intake that i am building, Just about 1 week before i start selling these. All you will need is the Air Filters and the Piping.
These are proably going to be 50 Dollars plus Shipping for the frist 10 or so then they are going to be 65
01-02-07, 12:18 AM
#38
Banned. I got OWNED!!!
Join Date: Mar 2005
Location: California- SF city of bay
Posts: 552
Likes: 0
Received 0 Likes
on
0 Posts
yeah.. i just installed mine 3 dayz ago.. better than stock let me tell you that... 
i like it.... i'm working a custom Kavlar duct right now!! instead of metal
i like it.... i'm working a custom Kavlar duct right now!! instead of metal
01-02-07, 06:16 AM
#39
Originally Posted by crxturboh22
yeah.. i just installed mine 3 dayz ago.. better than stock let me tell you that... i like it.... i'm working a custom Kavlar duct right now!! instead of metal
i like it.... i'm working a custom Kavlar duct right now!! instead of metal Thats cool on the duct, there have been a few people try and make custom fiberglass ones and then try and resale them. So far i am one of the only people that is making and still selling the metal ducts. Also i am starting to get a really good following with my custom work.
01-02-07, 11:18 AM
#41
My car is the one pictured in the top pic (red). You can see what I was talking about with the Greddy S pipe turned sideways and the straight pipe coming off of the Greddy elbow.
You may also notice in the picutre that I am in the process of sanding and polishing the duct to make it look prettier.
You may also notice in the picutre that I am in the process of sanding and polishing the duct to make it look prettier.
Originally Posted by Rx7_Nut13B
Just wanted to toss my name out there, I am the one that is building the XS Power intercooler ducts.
The work really well with these kits.
The ducts are welded with 18g alum and then painted black, unless you dont want it painted.
They are 125 + 20 flat shipping
Here are a few questions i get asked alot.
Will this work with the piping that comes with the Kit. YES
Is there any cutting on the frame or other.. NO
Will this work with KOYO and Fluidyne Rads...YES I run KOYO
Will this work with the stock fog lights.. YES/NO There is a small mod to make the foglights fit agian
Does the XS Power Intercooler fit with aftermarket air intakes..NO But i am working on a new True Cold Air Box for these
Here are the True Cold Air Intake that i am building, Just about 1 week before i start selling these. All you will need is the Air Filters and the Piping.
These are proably going to be 50 Dollars plus Shipping for the frist 10 or so then they are going to be 65
The work really well with these kits.
The ducts are welded with 18g alum and then painted black, unless you dont want it painted.
They are 125 + 20 flat shipping
Here are a few questions i get asked alot.
Will this work with the piping that comes with the Kit. YES
Is there any cutting on the frame or other.. NO
Will this work with KOYO and Fluidyne Rads...YES I run KOYO
Will this work with the stock fog lights.. YES/NO There is a small mod to make the foglights fit agian
Does the XS Power Intercooler fit with aftermarket air intakes..NO But i am working on a new True Cold Air Box for these
Here are the True Cold Air Intake that i am building, Just about 1 week before i start selling these. All you will need is the Air Filters and the Piping.
These are proably going to be 50 Dollars plus Shipping for the frist 10 or so then they are going to be 65
01-02-07, 11:50 AM
#42
Senior Member
Join Date: Nov 2006
Location: Memphis
Posts: 449
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Rx7_Nut13B
Just wanted to toss my name out there, I am the one that is building the XS Power intercooler ducts.
The work really well with these kits.
The ducts are welded with 18g alum and then painted black, unless you dont want it painted.
They are 125 + 20 flat shipping
Here are a few questions i get asked alot.
Will this work with the piping that comes with the Kit. YES
Is there any cutting on the frame or other.. NO
Will this work with KOYO and Fluidyne Rads...YES I run KOYO
Will this work with the stock fog lights.. YES/NO There is a small mod to make the foglights fit agian
Does the XS Power Intercooler fit with aftermarket air intakes..NO But i am working on a new True Cold Air Box for these
Here are the True Cold Air Intake that i am building, Just about 1 week before i start selling these. All you will need is the Air Filters and the Piping.
These are proably going to be 50 Dollars plus Shipping for the frist 10 or so then they are going to be 65
The work really well with these kits.
The ducts are welded with 18g alum and then painted black, unless you dont want it painted.
They are 125 + 20 flat shipping
Here are a few questions i get asked alot.
Will this work with the piping that comes with the Kit. YES
Is there any cutting on the frame or other.. NO
Will this work with KOYO and Fluidyne Rads...YES I run KOYO
Will this work with the stock fog lights.. YES/NO There is a small mod to make the foglights fit agian
Does the XS Power Intercooler fit with aftermarket air intakes..NO But i am working on a new True Cold Air Box for these
Here are the True Cold Air Intake that i am building, Just about 1 week before i start selling these. All you will need is the Air Filters and the Piping.
These are proably going to be 50 Dollars plus Shipping for the frist 10 or so then they are going to be 65
Do you have any pics of the intake duct installed? The IC Duct looks really good and I'll probably get one from you when I get my SMIC.
Thanks for the good work.
Jeremy
01-02-07, 05:04 PM
#43
Avoid Fuego Racing
X2 That is my setup and would VERY much like that.
Originally Posted by ArmitageGVR4
Any chance we can get a duct made for use with a GReddy elbow and turbojeff battery tray? The combination of those mods allows you to move the XS Power I/C way over to the driver's side and then you can run any aftermarket intake setup you'd like.
01-10-07, 02:00 AM
#45
Senior Member
Join Date: Oct 2002
Location: Hampton, VA
Posts: 596
Likes: 0
Received 0 Likes
on
0 Posts
I installed a similar style intercooler in my FD. Mine however is bigger than the XSpower unit. It measures in at 18x12x3.5 which is similar to the M2/ASP Large, or Pettit Coolcharge 3. My duct solution was to purchase a duct from Pettit for a Coolcharge 3. My total cost came to just under $350 for Intercooler and Duct, and then $100 for a pipe kit on Ebay. <$500 and works beautifully, and doesn't look too shabby either. Here's some pics and an Ebay link if anyone is interested.
Intercooler on Ebay
The car has been sitting for just over 2 months, so its dirtier than normal.
Intercooler on Ebay
The car has been sitting for just over 2 months, so its dirtier than normal.
01-10-07, 02:19 PM
#48
How much was the Pettit duct?
Originally Posted by mr_ouija
I installed a similar style intercooler in my FD. Mine however is bigger than the XSpower unit. It measures in at 18x12x3.5 which is similar to the M2/ASP Large, or Pettit Coolcharge 3. My duct solution was to purchase a duct from Pettit for a Coolcharge 3. My total cost came to just under $350 for Intercooler and Duct, and then $100 for a pipe kit on Ebay. <$500 and works beautifully, and doesn't look too shabby either. Here's some pics and an Ebay link if anyone is interested.
Intercooler on Ebay
The car has been sitting for just over 2 months, so its dirtier than normal.
Intercooler on Ebay
The car has been sitting for just over 2 months, so its dirtier than normal.