Worth it for $1400???
#1
Junior Member
Thread Starter
Join Date: Nov 2004
Location: Mission Viejo
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Worth it for $1400???
my friends shop is going to put me together a v mount setup for 1400
1400 covers a koyo kit for stock location, a custom spearco 20"x10"x2.5-3" intercooler. also included all instalation and piping
so would this setup be worth it
the intercooler would sit above the koyo at a slant.
any ideas??
1400 covers a koyo kit for stock location, a custom spearco 20"x10"x2.5-3" intercooler. also included all instalation and piping
so would this setup be worth it
the intercooler would sit above the koyo at a slant.
any ideas??
#2
Lives on the Forum
Join Date: Dec 2001
Location: San Lorenzo, California
Posts: 14,716
Likes: 0
Received 8 Likes
on
8 Posts
What about relocating p/s lines and a/c? What about shielding/ducting? What about the intake/battery? Lots of things to figure out. He's doing all the welding up of end tanks and piping?
If your friend is a good fabricator, it might work, but there's a lot of things involved. I wouldn't except it to be done over a weekend, that's for damn sure. If he can do it right, sounds like a hell of a good deal for you.
If your friend is a good fabricator, it might work, but there's a lot of things involved. I wouldn't except it to be done over a weekend, that's for damn sure. If he can do it right, sounds like a hell of a good deal for you.
#3
Junior Member
Thread Starter
Join Date: Nov 2004
Location: Mission Viejo
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
we already talked about teh battery and intake, but i will make sure he knows about the p/s and a/c
and yes he is doing the welding
thanks for the help
and yes he is doing the welding
thanks for the help
Thread
Thread Starter
Forum
Replies
Last Post