Wondering on just using greddy water pulley
04-10-02, 07:35 PM
#1
Senior Member
Thread Starter
iTrader: (2)
Join Date: Aug 2001
Location: Florida
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
Wondering on just using greddy water pulley
Ive got the blue greddy pulleys(water and Alt.) and I just wanna use the water pump pulley. Ive had alternator pulleys on before and hate how they dim my lights with the brakes on and etc. My question is if I can keep the stock alt. pulley and use the water pump pulley with no problem? Also what belt size would I need?
This is all to remove the Airpump.
This is all to remove the Airpump.
04-10-02, 10:42 PM
#4
Senior Member
Join Date: Nov 2001
Location: Houston
Posts: 520
Likes: 0
Received 0 Likes
on
0 Posts
just put on the belt and see how much room you need to compensate.. i'm guess 1/2 inch to an inch.. smaller belt. I have the greddy set up and lights don't dim.. i also have the underdrive pulley and since it is smaller than stock underdrive i had to get a smaller belt, But couldn't find a 5 ribbed one, had to go with a 4 rib one. WOrks fine.. AUTOZONE.. is where I got it. good luck.
04-10-02, 11:00 PM
#5
Full Member
Join Date: Mar 2002
Location: Cincinnati, Ohio
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
Heres the belt I use for the greddy alt/water pump pully kit with a unorthadox underdrive main reason Im posting it cause it is a 5 rib and was hard to find. Not say it will fit your car, but it should be possible to find the 5 rib in the right size
K050290 50=5 rib 290=29.0 inches
K050290 50=5 rib 290=29.0 inches
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
9
02-24-19 12:09 PM
roondawg
3rd Generation Specific (1993-2002)
6
08-24-15 04:43 PM
