Help can anyone tell me what my autometer sould be reading at idle
#1
Full Member
Thread Starter
Join Date: Oct 2001
Location: New York
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
Help can anyone tell me what my autometer sould be reading at idle
I need to know if my autometer guge is reading correctly at idle. At 940-1000 rpm it reads 10psi. Is this ok??? If I lower the RPM to 880 it reads about 5psi-opsi.
I need to know if I'm damaging the engine.
Also what should it be reading on acceleration and on boost??
Any help would be greatly appriciated. Thanks Diego
I need to know if I'm damaging the engine.
Also what should it be reading on acceleration and on boost??
Any help would be greatly appriciated. Thanks Diego
#2
IRS 4 Life
iTrader: (12)
Join Date: Feb 2001
Location: Sicklerville, South Jersey!!
Posts: 2,634
Likes: 0
Received 2 Likes
on
2 Posts
u mean 10kpa vacume? or 10 psi boost?
its basically impossible to make that kinda boost @ idle so im guessing its vaume.. 15kpa is around the norm @ 750rpms usally the higher the idle the lower the vac
its basically impossible to make that kinda boost @ idle so im guessing its vaume.. 15kpa is around the norm @ 750rpms usally the higher the idle the lower the vac
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
83revival
New Member RX-7 Technical
4
09-03-15 10:42 PM