3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Wobbly/loose stock seats - common causes/fixes?

Thread Tools
 
Search this Thread
 
Old Mar 18, 2024 | 10:44 AM
  #1  
msilvia's Avatar
Thread Starter
Senior Member
Tenured Member 15 Years
 
Joined: Sep 2006
Posts: 252
Likes: 9
From: DC Metro
Wobbly/loose stock seats - common causes/fixes?

Noticing my driver's seat has developed a bit of mild play or wobbling front to back as you sit down. Not shocking for a 30yo stock seat, but I'm wondering if anyone has previously ID'd common causes or fixes over the years. I searched and didn't find anything. When I last had it out of the car, I wasn't able to pinpoint a culprit piece.

To be clear, it is securely torqued down to the chassis mounts.
Reply
Old Mar 18, 2024 | 03:37 PM
  #2  
DaveW's Avatar
Racecar - Formula 2000
Tenured Member: 20 Years
 
Joined: Sep 2002
Posts: 4,034
Likes: 370
From: Bath, OH
Originally Posted by msilvia
Noticing my driver's seat has developed a bit of mild play or wobbling front to back as you sit down. Not shocking for a 30yo stock seat, but I'm wondering if anyone has previously ID'd common causes or fixes over the years. I searched and didn't find anything. When I last had it out of the car, I wasn't able to pinpoint a culprit piece.

To be clear, it is securely torqued down to the chassis mounts.
Not that I have this issue, but the 1st thing that occurs to me is the detent slots or the pin on the lever that you adjust the seat with may be worn.
Reply
Old Mar 18, 2024 | 03:58 PM
  #3  
tomsn16's Avatar
Lives on the Forum
Tenured Member: 15 Years
Liked
Loved
iTrader: (297)
 
Joined: Mar 2009
Posts: 5,193
Likes: 640
From: Murfreesboro TN
Never heard of this issue.... but not much to wear except the rail system and the seat- back pivot system
Reply
Old Mar 18, 2024 | 04:00 PM
  #4  
Pete_89T2's Avatar
Rotorhead for life
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (4)
 
Joined: Mar 2005
Posts: 2,199
Likes: 1,271
From: Elkton, MD
Originally Posted by DaveW
Not that I have this issue, but the 1st thing that occurs to me is the detent slots or the pin on the lever that you adjust the seat with may be worn.
^That's the 1st thing I'd check, and if you ever had the seats reupholstered at some point, I'd check the bolts that secure the seat rails to the seat bottoms as well - those have to come off when doing the job, and it's possible they may be loose.
Reply
Old Mar 18, 2024 | 05:24 PM
  #5  
DaveW's Avatar
Racecar - Formula 2000
Tenured Member: 20 Years
 
Joined: Sep 2002
Posts: 4,034
Likes: 370
From: Bath, OH
Originally Posted by Pete_89T2
... if you ever had the seats reupholstered at some point, I'd check the bolts that secure the seat rails to the seat bottoms as well - those have to come off when doing the job, and it's possible they may be loose.
That actually makes the most sense to me.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
pimpinthe7
2nd Generation Specific (1986-1992)
17
Aug 2, 2008 11:54 AM
Howco
1st Generation Specific (1979-1985)
1
Mar 15, 2008 06:06 AM
ppritchard
3rd Generation Specific (1993-2002)
16
Dec 20, 2007 01:40 AM
blondeRX7babe
Interior / Exterior / Audio
2
Mar 30, 2005 06:59 PM
vmb
2nd Generation Specific (1986-1992)
9
Sep 20, 2002 08:23 PM




All times are GMT -5. The time now is 11:44 AM.