Wiring HELP: Jacobs ProPak ignition. older version.
Thread Starter
Joined: Nov 2003
Posts: 3,331
Likes: 1
From: NW of windy city
Wiring HELP: Jacobs ProPak ignition. older version.
OK well a few months back i bought a jacobs propak ignition amp with a FC leading coil to handle the voltage. It is a blue box if that helps any. Here are the following wires:
Red----Power obvious
Black---Ground obviously.
Thats all i have right now
Know, there are 4 more additional wires that come oout of the box into 2 seperate 2-wire connectors. One connect has a Black and a Red wire and the other connector has a White and a Green wire. I got instructions from a forum member a while back and now i cant find them> Help would be much appreciated.
Red----Power obvious
Black---Ground obviously.
Thats all i have right now
Know, there are 4 more additional wires that come oout of the box into 2 seperate 2-wire connectors. One connect has a Black and a Red wire and the other connector has a White and a Green wire. I got instructions from a forum member a while back and now i cant find them>
Help would be much appreciated.
development
Joined: Aug 2002
Posts: 5,714
Likes: 7
From: Lafayette, LA
I haven't wired one...but maybe this will ring a bell 
one plug is going to be for the coil pack...my guess B/R connector...the other is for the ignitor signal; W/G
basically what needs happen...when the ignition is on, the Jacobs needs a "remote" turn on 12V signal. Then when the ECU sends a lead ignition signal...the jacobs needs a GND...then it will fire the B/R connector on the coil.
my guess is G is remote and W goes to the ignitor
hopefully someone who has wired one can chime in
one plug is going to be for the coil pack...my guess B/R connector...the other is for the ignitor signal; W/G
basically what needs happen...when the ignition is on, the Jacobs needs a "remote" turn on 12V signal. Then when the ECU sends a lead ignition signal...the jacobs needs a GND...then it will fire the B/R connector on the coil.
my guess is G is remote and W goes to the ignitor
hopefully someone who has wired one can chime in
Joined: Mar 2001
Posts: 30,800
Likes: 646
From: FL-->NJ/NYC again!
Damn dude, after I took the time to fax that crap to you (twice) you lost it? Plus, now I'm only 'a forum member' ?
white wire----->goes to black/red on fc coil
black wire------>goes to yellow/blue on fc coil
red wire-------->goes to black/red on oem ignition harness
green wire----->goes to yellow/blue on oem ignition harness
being the sharp intelligent lad that you are, you correctly surmised that the heavy black wire is the ground and the heavy red wire is the power
?white wire----->goes to black/red on fc coil
black wire------>goes to yellow/blue on fc coil
red wire-------->goes to black/red on oem ignition harness
green wire----->goes to yellow/blue on oem ignition harness
being the sharp intelligent lad that you are, you correctly surmised that the heavy black wire is the ground and the heavy red wire is the power
Thread Starter
Joined: Nov 2003
Posts: 3,331
Likes: 1
From: NW of windy city
Yeah i know, sorry rich . I spent the entire day looking for it on my desk and i swear i had it somewhere but obviously someone hated on it. lol. Anyways the 2 wires on my FC coil are white/black not the above colors you mentioned.
. I spent the entire day looking for it on my desk and i swear i had it somewhere but obviously someone hated on it. lol. Anyways the 2 wires on my FC coil are white/black not the above colors you mentioned.
Trending Topics
development
Joined: Aug 2002
Posts: 5,714
Likes: 7
From: Lafayette, LA
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
DocHoliday89
3rd Generation Specific (1993-2002)
5
Oct 12, 2015 07:42 PM
