wiring harness question for all?
07-26-05, 11:32 AM
#1
Senior Member
Thread Starter
Join Date: May 2005
Location: southern MI
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
wiring harness question for all?
ok i need a new harness so i called a local mazda dealer and they said there are 2 different wiring options available..1) a full wiring harness that includes brackets and ect for $890..2) just a wiring harness for $570..... both being for the engine bay harness
any idea which i would need to replace the harness in the engine bay.....they had no idea which i would need.good thing they are trained for FD's
any idea which i would need to replace the harness in the engine bay.....they had no idea which i would need.good thing they are trained for FD's
07-26-05, 02:10 PM
#2
Full Member
iTrader: (1)
Join Date: Sep 2004
Location: NY
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
A few questions come to mind. Why are you looking for a new harness? But I'm sure you have this one figured out already...
There are two harnesses for the engine that I know of. One plugs in to a dual clip that's right around the battery. Does the coils, some solenoids, oil pressure, oil level, alternator, etc. The other harness does the rats nets, the O2 sensor and goes through the firewall and plugs into the ECUs. I don't think they it will be harder to change then doing all the vacuum lines, but just go slow...
There are two harnesses for the engine that I know of. One plugs in to a dual clip that's right around the battery. Does the coils, some solenoids, oil pressure, oil level, alternator, etc. The other harness does the rats nets, the O2 sensor and goes through the firewall and plugs into the ECUs. I don't think they it will be harder to change then doing all the vacuum lines, but just go slow...
07-26-05, 02:34 PM
#3
Senior Member
Thread Starter
Join Date: May 2005
Location: southern MI
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
https://www.rx7club.com/showthread.php?t=438794..there is the thread where i came to the conclusion i need a harness.... 
anyway i believe that i need the harness that goes to the ECU..so im guessing that would be the cheaper harness without all the brackets and ect...am i correct?
anyway i believe that i need the harness that goes to the ECU..so im guessing that would be the cheaper harness without all the brackets and ect...am i correct?
07-26-05, 02:57 PM
#5
Senior Member
Thread Starter
Join Date: May 2005
Location: southern MI
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rynberg
Why aren't you calling Ray Crowe at Malloy Mazda?
well i can get it for pretty much the same price wasnt his 550? at my local dealer they want 570
07-26-05, 03:08 PM
#6
Lives on the Forum
Join Date: Dec 2001
Location: San Lorenzo, California
Posts: 14,716
Likes: 0
Received 8 Likes
on
8 Posts
Originally Posted by armanielite
well i can get it for pretty much the same price wasnt his 550? at my local dealer they want 570
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
08-23-15 09:28 AM