I recently put a rebuilt ported 13b in my 94 fd. Ever since i have had it back it has been blowing tons of black smoke and wont idle at all, not to mention i only get 70 miles to a TANK?!? i need some serious help is it fuel pump, filter, needs to be programed?? Any help is good help thanx

 

maybe you should tune it

 

yeah what he said ^

 

well i wanted to see if anyone had a problem like this before i go and spend w/e on a programer and i dont wanna lean it out and starve it for gas or sumthin stupid like that

 

What PCM are you using?

Joe

 

everything on the car is stock but the stage 1 port and hks intake.

 

Typically a "stage 1" port will not cause the symptons that you are describing.

It could be as simple as the connection to the map sensor, or a bad one at that. Is the Check Engine Light on? If so, you need to find out what's causing it, and that could possibly solve your problem.

Forget about the tuning advice for now. That's not going to be an issue with your current setup.

Joe

 

Wouldnt porting cause a car to run more lean?

 

A bad 02 sensor would make you run rich but not that rich. Make sure you are not leacking fuel anywhere.

 

presure test your fuel system to make sure there is not a bad injector o-ring or a stuck injector.

 

get a powerFC and a new o2 sensor

 

yeah i got a new o2 sensor and checked out the map sensor too

 

If it's the stock ECU, have you verified there are no error codes stored in the ECU? Not all codes trip the CEL.

 

anyone in or around central IL???

 

ok wtf i took off the intake and its running rich but not loading up when im at idle in drive.

 

What he said!