i was wondering where the vacume line goes that attaches to the front of the solinoid valve relief 1. its the second from the back. thanks, scott

 

consult the all-mighty FSM

 

i am consulting the all mighty forum, since i dont have a service manual, thanks, scott

 

Check out the diagram.

http://www.robrobinette.com/cgi-bin/i/images/hoses.gif

 

if you look in that diagram it jsut shows it looping under itself and goes to no where. the same as in this chart http://www.scuderiaciriani.com/rx7/v...se_diagram.jpg it is the little blue hose that goes under it self and disapeers to no where. is it jsut hooked up to a nipple on the uim or lim somewhere. thanks for the help, scott

 

Ok if my memory serves me correctly the hose coming out of solenoid B connects to a metal tube under solenoid A, then it connects from the back of the metal tube to a nipple (seems like) on the engine block on the fire wall side.

 

thank you. i did the responsible thing and took it out without noticing where it goes. thanks for the help. i guess i can jsut hook it up to and nipple then

 

Tee hee... I would argue that my colored pic is the best one....

www.zeroglabs.com/rx7/reference.htm

Brian

 

thanks wargasm, but in that diagram it loops under itself, but then in the background it appears again, so i understand that. but then it dead ends into a yellow line? what then? thanks again for all the help, scott

 

Ok wargasm's diagram is a lot better. Is there an extra metal pipe other then the 3? If not then I'll have to take a look at my rack, I won't have time until the weekend.

 

thank you all for your help, i really appreciate it. We were able to find out that it hooks into a mass of metal lines which eventually tee's into a vacume line for the uim. i thank you all for your help, and taking the time to get me out of a bind, thanks, scott