I dont know whats missing here:
1


2


3


Tnx for all help i can get

 

What mods are done to the car? Non-sequential with a boost controller? Looks like the preontrol/wastegate solenoids are gone, most of the rat nest, the pressure chamber, the long bolt that goes into the alternator bracket, the airpump and air control valve. I could go on and on.

 

Yeah, i know its a rat nest, i got the car 3 weeks ago. Bought it from USA.
So i dont know what mods done

 

Well picture #1 is the front relay box. It should have the other relay's in it. Also, it should be in a plastic "box" with a lid to keep the water out. See here:
https://www.rx7club.com/forum/showth...ight=relay+box

Picture #2 is the AC dryer. If it has been sitting in the elements, than the dessicant needs to be dried again before you recharge the AC. Some suggest putting it in the oven. However, others have found the dryer at local parts stores here. The missing area is another tube that I think has the pressure switch on it and goes to the AC compressor (lower driver side pulley)

 

1)Relay box shows your missing AC control relays you can compare top to figure out what else. My car is a 94 and seems to be orientated the oposite direction.





2)Ac dryer goes down to I'll have to guess the evaporator core (not sure) as it goes under my battery tray (not taking apart) my guess is AC is kaput.

3)white connector apears to be your coolant level (sensor on front of thermostat housing black in color) in case you have an automatic (extra sensor brown connector) under the UIM is the turbo control sol. I'd guess non-sequential. the taped up connector may be air pump (can't tell color) the other two to the right of the picture ??? more AC stuff???

 

tnx guys

But i think the relay box is different on the 93.. anyone have a picture of one?

And any pictures of the fuse box?

 

It is pretty clear the car has been in a front end accident. Look at the bent sheetmetal near the hood latch.

Take some shots of the entire engine bay. To me it looks like you've got a generic radiator hose, no IC duct, missing AC line in addition to the other stuff that was mentioned.

 

what problems are you having ??? are you just wanting to set it back up stock or trying to get the A/C working ? ? ? ?