This is an odd request, I contacted Mazda, no luck.
Does anyone know how to get the rubber seal that is on the door panel.
It is the seal that bridges the gap between the door panel and the door. It seems to be part of the door panel itself.

 

Unless you talked to Ray Crowe at Malloy Mazda you probably spoke with an FD-ignorant person at the parts counter. They can NEVER seem to find our parts. Do a search for Ray's number and give him a call. He will be able to find that part for the best price that you could find anywhere else and he will have it to you asap. hope this helps..

 

Well that could not possibly be more helpful.
Thank you

 

Big Bad Ray's # is 888 533 3400

 

Chances he has that part?

 

Thanks Rich

 

yeah sorry I did not have the number on hand. Rich to the rescue...

Ray more than likely has it in stock, but if he doesn't he can still usually get it to you in a few weeks. 100% he can get ahold of it.

 

If Ray can't get it, it doesn't exist.

 

haaaa im fired up to call this guy

 

If this is the seal that goes right around the whole door, they are a little tricky to get off and on, because the seal passes between the door inner and outer hinges.
The inner hinge pin has to come out. The seal is seated on a metal lip along the upper door and embedded plastic inserts push into door holes along the bottom section of the door.
Hope this helps...

 

Actually, he can't get the JDM '99 spec parts. I tried to get my front bumper through him years ago and it wasn't happenin'. Anything US-spec he can get though

 

I just gave one away from my parts car. If Ray does not have one, check with someone parting out a car.

 

mannnn someone must still have this and not have given it away. I cant wait for ray to come to the rescue