hurleysurf24

iTrader: (3)

I do not need to worry about emissions, but I want to get rid of the spaghetti. What can I block off and keep the idle and the rest of the car fairly smooth.

I'm not running a standalone at the moment, prefer not to premix, and want to keep the A/C.

I'm assuming EGR, BAC .. whatelse

moconnor

iTrader: (14)

If your car is running smoothly I would leave it alone.

There is a significantly greater than even chance that your car will not be running smoothly when you are finished.

Six Rotors

iTrader: (17)

partcularly when you don't know what you are doing and are unable to use the search function.

hurleysurf24

iTrader: (3)

stfu ... k thanks.
im not the one doing the work on the car at the moment.

rx7_boy

You should be running a aftermarket ECU if you want to disconnect the rats nest or else no matter what you car wont be running right!!!!!

Or else your going to have to mess with adding the resitors in and thats a pain in the ***

RLaoFD

iTrader: (6)

what does that have to do with not knowing what you're doing? If you just used the search function, there is a lot of information you can dig up. Search for "simplified sequential"

apexFD

I would run a PFC if you plan an emissions delete, expecially with no airpump. My car ran like a bag of garbage with the stock ECU, i didnt even bother driving it until i installed my PFC.

+1, there is TONNES of info on this. IF you want to get rid of EVERYTHING then you will need to run the turbos parallel, other wise you need to figure out the simplified vac system. Its not that bad, i got it right the first time.




=Ben

dom240sx

iTrader: (1)

http://www.rotaryresurrection.com/3r...ov_nonseq.html

hurleysurf24

iTrader: (3)

ah yes .. i did forget about kevins writeup