VMIC vs SMIC Challenge
#176
Where has my $ gone?
iTrader: (12)
Join Date: Feb 2004
Location: Bay Area, Cal/Phoenix, AZ
Posts: 1,654
Likes: 0
Received 7 Likes
on
2 Posts
Originally Posted by IlRX8lI
Oh, and do yourselves a favor and stop messing around about peoples' usage of the English language, it just makes it look like your argument against Chuck stems from some sort of racism.
#177
BNR built motor and twins
Join Date: May 2003
Location: 2 hours drive from sanity
Posts: 1,235
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by rotaryextreme
Don't thank me. I have to thank you for all your support. Customers like you are what's keeping me in this business. I have thought about quitting numerous times due to many reasons such as health, family, etc. But every time I see feedbacks like this, it just keeps me moving. Everything is worth it.
Chuck
Chuck
I was sold on your customer service when I shipped you my tow hook last year and you test fitted it with your 99spec bumper and sent me pics back. It's hard to come by service like that! Finding vendors that go the extra mile are few and far between no matter what field of play you're in. I wish some of the vendors I deal with at work were 1/2 as helpful...
#178
Rotary Enthusiast
Originally Posted by AgentSpeed
I was sold on your customer service when I shipped you my tow hook last year and you test fitted it with your 99spec bumper and sent me pics back. It's hard to come by service like that! Finding vendors that go the extra mile are few and far between no matter what field of play you're in. I wish some of the vendors I deal with at work were 1/2 as helpful...
amen to that
chuck's customer service is superior to anyone else i have dealt with. He treats his customers like his friends. he even lets me bug him on aim for advise on my lemonmobile.
#179
white FD lover
Join Date: Feb 2003
Location: central jerzy
Posts: 1,534
Likes: 0
Received 0 Likes
on
0 Posts
true that martin, chuck helps me out and im not even a damn customer of him yet, until i get my injectors and fuel pump. Chuck is da man and the "veterans" here are all real, cool, dudes.
#181
Rotary Freak
I don't want to interferre in this issue . Have ben reading it from the start and it's been said here before. The decision to decide what way to go with your set up will (mostly) be pointed out by the budget you have. The performance you get back from it will mostly always satisfy your need as there are few other brands/parts to compare it with. no setup (from whatever supplier) is the same and can therefore not be compared.
The number of persons on this board or into whatever car brand will have the oppurtunity to buy whatever they want at whatever cost.
each setup, VMIC,FMIC or SMIC, will do it's job according it's function. No way to compare performance. From a logical point if view you must admit that the VMIC setup is the only setup guiding incomming (heated) up air AWAY from the engine (especially with a vented hood). Both F%IC and SMIC will force hot air troughout the engine bay.
Concequence is that VMIC is the best for the TOTAL of the engine. And that's worth a lot to me as well considering the hot air problematics regarding RX7's/rotaries.
Like I said. You should not compare apples and oranges, more like budget to parts to performance.
The fact that Chuck even want's to go this far is pointing out he trully believes in his product. Which in it's turn should be the true foundation of selling parts.
The basics of good marketing is to point out the positive points of your product, not to compare and breakdown the competitors products. It will work against you in the end.
The number of persons on this board or into whatever car brand will have the oppurtunity to buy whatever they want at whatever cost.
each setup, VMIC,FMIC or SMIC, will do it's job according it's function. No way to compare performance. From a logical point if view you must admit that the VMIC setup is the only setup guiding incomming (heated) up air AWAY from the engine (especially with a vented hood). Both F%IC and SMIC will force hot air troughout the engine bay.
Concequence is that VMIC is the best for the TOTAL of the engine. And that's worth a lot to me as well considering the hot air problematics regarding RX7's/rotaries.
Like I said. You should not compare apples and oranges, more like budget to parts to performance.
The fact that Chuck even want's to go this far is pointing out he trully believes in his product. Which in it's turn should be the true foundation of selling parts.
The basics of good marketing is to point out the positive points of your product, not to compare and breakdown the competitors products. It will work against you in the end.
#182
controlled kaos
iTrader: (3)
Hey Chuck, you really don't need to prove the whole issue...just leave it the smart's and logic... they will come running... v-mount is better bar none.. if they still want to argue, it's at the price of they're own ego and waisted money.....haha
I'd be laughing all the way to the bank, as I deposited money earned for an excellent product...
I'd be laughing all the way to the bank, as I deposited money earned for an excellent product...
Thread
Thread Starter
Forum
Replies
Last Post
rx8volks
Canadian Forum
0
09-16-15 09:07 PM
msilvia
3rd Generation Specific (1993-2002)
15
09-11-15 12:13 PM