Vacuum leak or something else?
Vacuum leak or something else?
This just happened this morning, yesterday the car boosted fine up to 15psi.
Started car, noticed my boost gauge read -20 instead of -15 like it normally does(i have a street port). Once i was about halfway to work and the engine was warm i wanted to see if it would boost right and punched it in 2nd, only got to 4PSI with WOT. AFR gauge says i was running rich the whole time too.
soon as i get off work i am going to check all the hoses. i am running non sequential stock twins...heres to hoping its just a little vacuum leak ^_^ lol
Started car, noticed my boost gauge read -20 instead of -15 like it normally does(i have a street port). Once i was about halfway to work and the engine was warm i wanted to see if it would boost right and punched it in 2nd, only got to 4PSI with WOT. AFR gauge says i was running rich the whole time too.
soon as i get off work i am going to check all the hoses. i am running non sequential stock twins...heres to hoping its just a little vacuum leak ^_^ lol
loose coupler. didnt have time to check it before i posted due to clocking in as soon as i got to work but i just went out there to check it while i was at lunch. waste of a thread 
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
gabescanlon
3rd Generation Specific (1993-2002)
4
Sep 5, 2015 12:04 AM