vacuum leak?
04-30-09, 12:18 PM
#1
Bang Bang!
Thread Starter
iTrader: (1)
Join Date: Mar 2007
Location: Boston
Posts: 612
Likes: 0
Received 0 Likes
on
0 Posts
vacuum leak?
single turbo fd
pfc
car idles at 900 but as soon as i step on the brakes the car dies
with out foot on brake idle is at 20 vaccuum
foot on brake car goes to 10 vaccuum and dies.
im looking for a vaccum leak now..
any other ideas?
pfc
car idles at 900 but as soon as i step on the brakes the car dies
with out foot on brake idle is at 20 vaccuum
foot on brake car goes to 10 vaccuum and dies.
im looking for a vaccum leak now..
any other ideas?
04-30-09, 12:39 PM
#2
Rotary Freak
Join Date: Jan 2004
Location: tampa
Posts: 1,899
Likes: 0
Received 0 Likes
on
0 Posts
pinch off the booster hose and start the car, then apply the brakes see if it goes away. could be a leaking brake booster.
with the car off pump the brakes until they get hard
while holding the pedal down(will be high and hard) start the car
should get softer and go towards the floor a ways. all done with the booster vac line attached
with the car off pump the brakes until they get hard
while holding the pedal down(will be high and hard) start the car
should get softer and go towards the floor a ways. all done with the booster vac line attached
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
gabescanlon
3rd Generation Specific (1993-2002)
4
09-05-15 12:04 AM