The US FD - 255hp??
Full Member
Joined: Apr 2003
Posts: 77
Likes: 0
From: Colorado
Originally posted by DaiOni
"They aren't drag cars though.. "
as opposed to what? a top fueller?
The numbers they run in japan (particularly, vs $$$ invested) would say that they can be a pretty damn fine drag car.
there's at least a couple in australia running 7s. Isn't the record FD a 6 second car from puerto rico or somewhere?
but you're right they're not drag cars from the factory - but what is?
"They aren't drag cars though.. "
as opposed to what? a top fueller?
The numbers they run in japan (particularly, vs $$$ invested) would say that they can be a pretty damn fine drag car.
there's at least a couple in australia running 7s. Isn't the record FD a 6 second car from puerto rico or somewhere?
but you're right they're not drag cars from the factory - but what is?
Senior Member
Joined: Apr 2002
Posts: 433
Likes: 1
From: Ljungby, Sweden
In europe we only got 241 hp.
A special R1 version that's combined with the touring version resulting in leather seats sunroof and A/C added on the R1 package.
I made a 13.83 at the 1/4 mile with a 2.26 sec 60'
A special R1 version that's combined with the touring version resulting in leather seats sunroof and A/C added on the R1 package.
I made a 13.83 at the 1/4 mile with a 2.26 sec 60'
Re: Re: The US FD - 255hp??
Originally posted by rpm_pwr
... and while I'm settling things, the "efini y-pipe" was not fitted to efini RX-7s until 1999. Prior to that they all had the same y-pipe (and x-over) as the rest of us.
-pete
... and while I'm settling things, the "efini y-pipe" was not fitted to efini RX-7s until 1999. Prior to that they all had the same y-pipe (and x-over) as the rest of us.
-pete
For the series Series VII (96-98 RX-7's), its clear that the metal Efini Y-pipe was added as well as some slight ducting changes to the IC/Airbox. In fact, if you check the Big List RX-7 archives, the Efini Y-pipe modification was discussed well before the Series VIII (99-02) RX-7's came out.
Senior Member
Joined: Mar 2001
Posts: 348
Likes: 1
From: Brisvegas, Aust
My mistake! I just did a search for series 7 rx-7 pictures and found the OZ-spec ones first:
Looks like the s6 one doesn't it? While I'm being corrected, I'll correct myself, OZ-spec S6's DO have EGR valves.
-pete
Looks like the s6 one doesn't it? While I'm being corrected, I'll correct myself, OZ-spec S6's DO have EGR valves.
-pete
Thread
Thread Starter
Forum
Replies
Last Post
bewst12psi
Haltech Forum
12
May 24, 2010 08:26 PM
ICE_Pilot
Rotary Car Performance
30
Mar 5, 2003 08:59 PM
