Undertray Question
#1
Junior Member
Thread Starter
Join Date: Jan 2015
Location: GA
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Undertray Question
So I need an undertray for my 93 stock bumper. Does the shineauto undertray FD3S RX-7 Misc. Items | Shine Auto Project
fit stock bumper?
I know it says for 99 spec bumper, but how different would it be to stock 93? I don't mind cutting a bit off if its too long?
Or just look for a 93 undertray.
Thanks for the insight!!!!!!!!
fit stock bumper?
I know it says for 99 spec bumper, but how different would it be to stock 93? I don't mind cutting a bit off if its too long?
Or just look for a 93 undertray.
Thanks for the insight!!!!!!!!
#2
I don't know anything about the shine undertray but I did pick up a lrb speed one and am very happy with the product and is made to fit the 93-95 bumper and is aluminum I would say check it out before u go and pick up a shine one
#5
https://www.rx7club.com/3rd-generati...rtray-1114576/
#6
Eats, Sleeps, Dreams Rotary
iTrader: (19)
Here's the LRB one:
FD Under Tray
FD Under Tray
#7
RX-7 Bad Ass
iTrader: (55)
Also I think you can still get new undertrays from Mazda. I want to say they're $150-ish or so.
Dale
Dale
Trending Topics
#8
Rotary Enthusiast
iTrader: (32)
The OEM undertray is worth every penny. My car had a hacked up OEM tray from the previous owner, missing the top air baffle and some other strange mods. After I replaced it with a new tray I noticed a marked drop In ECT.
Get a new or good/unmodified used OEM tray for best cooling performance. Just my .02
Edit: It looks like the LRB tray also has some good coverage to block airflow loss on the sides, and a deflector plate to seal off the bottom. Probably works pretty good. Would still go with the OEM tray though...
Get a new or good/unmodified used OEM tray for best cooling performance. Just my .02
Edit: It looks like the LRB tray also has some good coverage to block airflow loss on the sides, and a deflector plate to seal off the bottom. Probably works pretty good. Would still go with the OEM tray though...
Last edited by jza80; 05-25-17 at 02:11 PM.