3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Trouble Shooting No crank, no start, no click, Hazard/horn are ON

Old Sep 24, 2022 | 12:31 AM
  #1  
REAmFC3S's Avatar
Thread Starter
Full Member
Tenured Member: 15 Years
iTrader: (12)
 
Joined: Jun 2008
Posts: 70
Likes: 0
From: The City/SF
Trouble Shooting No crank, no start, no click, Hazard/horn are ON

I have a 1993 RX7 FD3S Base that having issue. Yes i search in the forum seem like most of them does not seem to have hazard/horn on like the vehicle im looking at. Vehicle does not start, no crank, no click, Hazard/horn are on, Dash is lit up with all the lights.

Battery is fully charge
Try jumping starter relay/clutch switch does nothing.
Visual check on the fuse at the engine bay. I will check ohm them to double check
Try to see if there is fault code with the paper clip at the diag port does not show any fault

I will be taking the starter out soon to bench test it to confirm the operation of it.

Sounds to be it is an immobilizer/alarm issue. Does anyone know how i can check/test this??

Thanks


Reply
Old Sep 24, 2022 | 09:59 AM
  #2  
cr-rex's Avatar
half ass 2 or whole ass 1
Tenured Member 10 Years
iTrader: (114)
 
Joined: Nov 2011
Posts: 3,425
Likes: 489
From: okinawa to tampa
When you put they key on 2 does everything come on like normal? Fuel pump, radio, windows work, headlights.... all that?
Reply
Old Sep 24, 2022 | 10:39 AM
  #3  
DaleClark's Avatar
RX-7 Bad Ass
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (56)
 
Joined: Jan 2002
Posts: 15,622
Likes: 2,725
From: Pensacola, FL
Flashing lights and horn are the security system going off. You can probably just unplug CPU #2 for troubleshooting purposes, that has the whole alarm system in it. Then figure out why it keeps tripping the alarm.

Also I would hook up the battery with the doors all unlocked. If it tries to flash/honk, put the key in door lock and lock/unlock the doors. If it's still doing it turn the ignition to On. If still doing it, go the CPU#2 route and troubleshoot more later.

Dale
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
j_t_rider
2nd Generation Specific (1986-1992)
5
Mar 16, 2007 12:11 AM
sem7sem
3rd Generation Specific (1993-2002)
9
Dec 12, 2006 09:37 AM
Enconsiderate
3rd Generation Specific (1993-2002)
12
Mar 9, 2004 04:44 PM
kelrx7r1
General Rotary Tech Support
8
Apr 13, 2002 09:11 AM
kelrx7r1
3rd Generation Specific (1993-2002)
14
Apr 4, 2002 11:39 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:28 AM.