eo2am

iTrader: (9)

Ok I'm ripping out my my 94 MT front harness so I can replace it. Now the question is can I replace it with a 94 AT harness or do I need to find a 93-95 MT harness?

badddrx7

iTrader: (7)

Negative - you need a manual with a manual. The auto front harness has things like a dropping resistor connector and wires, etc, etc.

Later

eo2am

iTrader: (9)

thats what I figured. is there any differnce between the 93-95 MT harness? The only option that I dont have is the fog lights.

BADSVN2000

Not to mention that the auto ABS system is wired completely different to the manual loom as I found out when I changed the front loom from Auto to manual and found my ABS light was on due to the rear loom of the car being configured differently. Keep it manual or change the lot!! You will need every relay box etc to do the conversion unless they match up ie parts labeled FD100 will not interchange with parts labeled FD110.

eo2am

iTrader: (9)

oh Im keeping the car manual, Im just getting the engine bay repainted, and replacing all the stuff the previous owner oversprayed orange.

eo2am

iTrader: (9)

So are the 93 harness the same as the 94 and 95 manual harness?

IRPerformance

iTrader: (41)

No, there are some slight differences between the harnesses depending on the year. You might want to call Alex at Gotham. I know he ran into this when swapping harnesses.

Eggie

If you're not buying a new, $$$ harness, rewrap your current one. It's a PITA job, but you'll know the harness's condition. Can't say that about a used harness.