I thought for sure I would find the answer to this question through a search, but no luck. I'll be really embarressed if someone comes up with a link that answers it

What is the stock distance from the ground to the top of the wheel well in the front and rear?

Thanks,

--
pedalpusher

 

NO one must know , so just get a set of lowering springs and bring it down , it will handle better and you will be looking good.

 

Actually, that's why I was asking...

I put a set of JIC FLT-A2s on and wanted to adjust them to stock height to start off with. Right now the rear end is slammed, so I wanted to raise it to the stock height. This is in prep for some 18x10 wheels with 285/30 tires. I don't want them to rub right off the bat

--
pedalpusher

 

the Critical Measurement is from the center of the wheel (not the ground!) to the top of the wheel arch (eliminates Tire&Wheel size as a vairable) its is given in the Suspension section of the FSM (but I dont have my fsm handy as I am at work right now). The FSM is available online someplace do a search for fsm and it should turn up some links here on the forum.