Ok. So I've searched just about everything and I know what sizes I need, but have no idea where to get them.

Seems that the FC oil cooler fittings are M18 and the FDs are M22. Unfortunately Earls, Areoquip or Russell don't have anything by way of an M22 to -10 fitting.

I'd rather not weld onto the cooler itself, so does anyone know where to get a fitting of said size?

Thanks in advance!

 

http://64.202.180.37/files/metric.pdf

From:
http://www.batinc.net/main.htm

$17.25 each + shipping. Expensive yes...but much cheaper than the $30 each that people on this board normally get them for.

 

Awesome!

Thank you!

 

Of course...with the plethora of misinformation around this board and no one actually knowing sizes of things (and me believing it) I get the wrong part. It's certainly NOT M22. Most likely M24 of which I will eventually confirm.

 

yesterday i took a stock fd oil cooler in to Pegasus and bought all the fittings and hose so as to add a second fd oil cooler...

the adapter fittings at the oil cooler are M22 X 1.5

the adapter fitting at the block (front driver's side) is M18 X 1.5

howard coleman

 

Unless they gave me the wrong size...

I originally thought the oil coolers were M18, which I bought. Way too small. I then picked up some M22s. Too small as well, though definitely larger than the M18s. This definitely doesn't make any sense.

 

Ok. Somehow I'm a dumbass. Yes, it's an M22 x 1.5. Don't ask me what I was toking on at that time.

Thanks all for your help.