Starting/running trouble - single turbo, Link ECU
#1
Full Member
Thread Starter
Starting/running trouble - single turbo, Link ECU
Having some issues getting my FD going with a Link G4, spec is:
1993 car
T04Z
550/1650cc Bosch injectors (top feed)
MSD 6AL + GM twin coil leading ignition
AEM IGN1A trailing ignition
340lph fuel pump
Radium FPR
Link 3 bar MAP sensor
Stock ports
The car starts but the idle hunts really badly, the car also won't respond to throttle inputs. If I blip or hold the throttle nothing happens, it just kind of bogs. I knocked the master fuel up a bit and it seems to run better, with it at the standard 12ms the car would just stall. Will grab a video from my phone, but have attached logs and map. Map is basically just the base map, I've just added a wideband to the AN Volt 5 input. Any help greatly appreciated!
Map and logs: https://we.tl/t-bjwt5kR5Kf
Video: https://m.youtube.com/watch?v=NyZUrbnaOfI&feature=youtu.be
1993 car
T04Z
550/1650cc Bosch injectors (top feed)
MSD 6AL + GM twin coil leading ignition
AEM IGN1A trailing ignition
340lph fuel pump
Radium FPR
Link 3 bar MAP sensor
Stock ports
The car starts but the idle hunts really badly, the car also won't respond to throttle inputs. If I blip or hold the throttle nothing happens, it just kind of bogs. I knocked the master fuel up a bit and it seems to run better, with it at the standard 12ms the car would just stall. Will grab a video from my phone, but have attached logs and map. Map is basically just the base map, I've just added a wideband to the AN Volt 5 input. Any help greatly appreciated!
Map and logs: https://we.tl/t-bjwt5kR5Kf
Video: https://m.youtube.com/watch?v=NyZUrbnaOfI&feature=youtu.be
Last edited by jack_am; 07-17-21 at 06:04 PM.
The following users liked this post:
jack_am (07-18-21)
Thread
Thread Starter
Forum
Replies
Last Post
Taylor Hitt
3rd Generation Specific (1993-2002)
11
06-02-20 01:41 PM