I am installing a TO4S kit and need a map to tune with. Is the Modified Map 5 on the list of maps good for my mods and the set-up I'm going to have? It looks like it would be perfect but I have very little experience with modifying fuel and ignition maps.

I will be boosting 1 bar to start and could I do this safely with this map until I get it tuned? Should I boost lower lets say 12lbs or .8 bar?

Has anyone ran this map and how was your experience? Do I have run this map with the use of a datalogit? Could I just log in the values through my Commander or would I need the datalogit?

Here it is.


Modified Map 5
Modifications include: XS Engineering T04S Single Turbo Kit | Greddy Front Mount Intercooler | 1300cc 2ndary Injectors | Midpipe | Greddy Catback | Hks Twin Power Ignition | Nippondenso Fuel Pump | Stock Motor | Pulley Set Please note: This is a base map for tuning. It is setup a little rich, but the timing is correct.

The link to it.

http://www.rx7store.net/xssingleturbomap.xls

Sorry about the barrage of questions.

Garrett

 

NO!!!!

Do NOT use that map. It was tuned by XS and they make changes to the base map to hide their tuning on the adjustment maps.....In otherwords, those maps are very bad using the default base maps.

PM Wargasm, he has a TO4S, maybe he can help you out. I would only run 10 psi or less with someone else's map until you can get it tuned.