Starting my Non Seq project

Reply Subscribe

Thread Tools

Search this Thread

Apr 8, 2004 | 01:42 PM

FD3RotorTurbo

Thread Starter

FD3Rotor

iTrader: (1)

Joined: May 2003

Posts: 418

Likes: 1

From: Utah

Starting my Non Seq project

I finally got my block off plates in. but i have a few questions.... I am really worried about porting the wategates. what did you guys all use to do it? Thanks.

Apr 8, 2004 | 02:19 PM

dubulup

development

Joined: Aug 2002

Posts: 5,714

Likes: 7

From: Lafayette, LA

Pettit Racing. Or another buisness that does rebuilds.

Apr 8, 2004 | 05:28 PM

Sesshoumaru

Tenseiga

iTrader: (1)

Joined: Apr 2003

Posts: 2,252

Likes: 0

From: Iowa

dremel ;0

Apr 8, 2004 | 05:56 PM

rdavidsrx7

block-spike

Joined: Feb 2004

Posts: 548

Likes: 0

From: West Chester, PA

I didn't....do it or need to.

Apr 8, 2004 | 07:00 PM

widebody2

addicted to lounge

Joined: Aug 2001

Posts: 1,707

Likes: 2

From: ny,LI

why are you going non-seq?

Apr 8, 2004 | 07:11 PM

FD3RotorTurbo

Thread Starter

FD3Rotor

iTrader: (1)

Joined: May 2003

Posts: 418

Likes: 1

From: Utah

because i want to have the turbos to come on line at the same time. it makes a world of difference. and i dont always like to be in boost.

Apr 8, 2004 | 10:07 PM

Fd3BOOST

Recovering Milkaholic

iTrader: (7)

Joined: Jan 2002

Posts: 8,206

Likes: 0

From: Budds Creek, Maryland

If you want to do it, and you don't necessarily have to in order to prevent boost creep. Then you should use a a single cut carbide burr with a pneumatic die grinder. Both can be bought off ebay.

Starting my Non Seq project

Starting my Non Seq project

Trending Topics