Spark plug removal problem
#1
Senior Member
Thread Starter
Spark plug removal problem
I've never really encountered this problem before... but is there some sort of special tool I could use to get my plugs out???
#2
Original Gangster/Rotary!
iTrader: (213)
those look like BRxEIX plugs..... you'll need a 'special' socket that has had the outer circumference ground down to fit. Not sure where you can buy them currently, KG parts used to but I don't think he does any more.
One more reason to use the proper spark plugs IMO, I'm guessing the previous owner left you a nice surprise
One more reason to use the proper spark plugs IMO, I'm guessing the previous owner left you a nice surprise
Last edited by GoodfellaFD3S; 12-01-10 at 08:31 PM.
#3
*******
iTrader: (9)
Join Date: Dec 2001
Location: NJ
Posts: 1,784
Likes: 0
Received 0 Likes
on
0 Posts
You need one of these:
http://www.racingbeat.com/RX8/Ignition/11529.html
Some people make their own, I currently need one too.
http://www.racingbeat.com/RX8/Ignition/11529.html
Some people make their own, I currently need one too.
#4
Wow $77 for a spark plug socket?
Go pick up a cheap 13/16 for $4 and start grinding, then when you get those plugs out, buy the proper ones that are the correct size/length
Stock & Race plugs http://banzai-racing.com/store/93+_r...ark_plugs.html
Go pick up a cheap 13/16 for $4 and start grinding, then when you get those plugs out, buy the proper ones that are the correct size/length
Stock & Race plugs http://banzai-racing.com/store/93+_r...ark_plugs.html
#6
rotorhead
iTrader: (3)
speaking from experience, grinding down a socket is a big pain in the ***. The socket has to be very thin and it has to be ground down evenly to work. If you grind it too thin in one area the socket can split as you are trying to turn the plug, and then worst case scenario you can ruin the hex on the socket. just buy the socket and you'll never have to worry
Trending Topics
#11
I have done this to mine, grab an angle grinder and start grinding until basically the socket edge becomes sharp. then sand it down to smooth it a bit, give it a good wash and go.
Yet its still not easy with the ground down socket. this is why Im chaning to the proper plugs next time.
Yet its still not easy with the ground down socket. this is why Im chaning to the proper plugs next time.
#12
SideWayZ The Only Way
iTrader: (11)
i have done this 3 times, first time worked and had not problems grinding it, but i ended up dropping it from my shelf and it cracked the thin part, second time i ended up grinding it to much, third one i have had and have changed the plugs 4 times with it and doesnt look like its cracking or anything.
#13
Junior Member
iTrader: (7)
Join Date: Sep 2009
Location: So.CAL
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Does anyone?....
Do any of you guys have pix of a custom made socket b/c I'm having the same issue? Any pix would be appreciated =) Thanks guys Oh yes $77 for a darn socket lol RacingBeat is making a killing of this, I've given it some thought, but rather try to grind a regular socket first.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM