Redbul

iTrader: (26)

Please be more specific. Perhaps a pic? Please note on the dial switches, there is a small lock nut behind the dial. If that nut becomes loose your dial will turn like it is broken. You can tighten with a pair of needle nose pliers.

bonestock11

iTrader: (1)

so that nut broken right off my **** looks like broke through the plastic backing

Redbul

iTrader: (26)

If
If you are looking for a complete unit it could be quite expensive. Below is a RHD textures surface unit.

Redbul

iTrader: (26)

So you might need a new faceplate? The switch itself may be OK.

What texture are your plastics?

You might need to only replace the mounting cup behind. It screws onto the faceplate from behind.

bonestock11

iTrader: (1)

how much?I have the textured dash plastics

bonestock11

iTrader: (1)

the switch itself is fine exactly i just need the plastic trim

Redbul

iTrader: (26)

The above one is sold recently. I will look for another.

Redbul

iTrader: (26)

C$250 before shipping. Price is reduced by about $100 due to bottom two "eyes" are broken off. They are not critical to unit fitment as there are additional mounting /positioning clips in the back.

This is a later version which does not have the dimmer switch.

Background lighting is green.

Dimmer switch blank can be removed and a dimmer switch can be added (only useful if you have the dimmer switch wiring).

Redbul

iTrader: (26)

I am still guessing you may only need the detachable mounting cup.

You can send me a pic in a DM.

Redbul

iTrader: (26)

bonestock11

iTrader: (1)

yup thats exactly what I needed

Redbul

iTrader: (26)

C$35 before shipping.