3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

smoking issue

Thread Tools
 
Search this Thread
 
Old 08-27-23, 01:47 AM
  #1  
Full Member
Thread Starter
 
Brisky's Avatar
 
Join Date: Dec 2020
Location: California
Posts: 52
Likes: 0
Received 4 Likes on 2 Posts
smoking issue

just did a new turbo swap hoping to fix my smoking issue (which it did for 2 days). 2nd night the line to my hks bov blows and i limp it home 5 minutes. i get a new line and on the 3rd day i start the car and everything is fine, i let it warm up and it starts a smoke show. after awhile of changing plugs which i had on hand and checking the inter cooler and throttle body elbow for oil it’s fine. but i notice a oil puddle under a exhaust leak just dripping out. i’m guessing it’s an oil control ring. any ideas ?. it’s a stock motor and stock turbos.
Old 08-27-23, 05:33 AM
  #2  
Arrogant Wankeler

 
Slides's Avatar
 
Join Date: Nov 2006
Location: Newcastle NSW Australia
Posts: 713
Received 119 Likes on 96 Posts
Definitely sounds like turbine side leak. There were no restrictions anywhere on the cartridge drains/no kinked return lines?
Old 08-27-23, 05:36 AM
  #3  
Full Member
Thread Starter
 
Brisky's Avatar
 
Join Date: Dec 2020
Location: California
Posts: 52
Likes: 0
Received 4 Likes on 2 Posts
Originally Posted by Slides
Definitely sounds like turbine side leak. There were no restrictions anywhere on the cartridge drains/no kinked return lines?
all the lines and their connections are dry. turbos have less then 400 miles so i’ll be bummed if another pair is trashed.
Old 08-27-23, 11:17 AM
  #4  
よ*ろ*し*く*
RX7Club Vendor
iTrader: (4)
 
FDAUTO's Avatar
 
Join Date: Sep 2022
Location: Tampa
Posts: 770
Received 245 Likes on 180 Posts
Assuming your last pair of turbos were blown AND oil was coming out of them, it's possible what you're seeing is residual from them. Not sure how extensive of a cleaning you did during the swap but you'd be surprised how long residual oil takes to completely burn off inside of a cast manifold.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MclarenF1
3rd Generation Specific (1993-2002)
10
12-03-09 02:53 PM
KKMpunkrock2011
3rd Generation Specific (1993-2002)
5
10-10-08 05:18 PM
jacobcartmill
3rd Generation Specific (1993-2002)
15
11-28-05 01:38 AM
Rx7thHeaven
Single Turbo RX-7's
3
08-16-01 08:15 AM



Quick Reply: smoking issue



All times are GMT -5. The time now is 06:16 PM.