3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Smelly,smoky rough idle

Thread Tools
 
Search this Thread
 
Old May 25, 2004 | 07:10 PM
  #1  
jdrebar's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Apr 2004
Posts: 25
Likes: 0
From: seattle
Smelly,smoky rough idle

As some of you do, i start my car in gear as to avoid the 3000 rpm startup. when i do it now and take it out of gear after a few secs it runs rough and smokes a little and smells alot like unburnt fuel. after it warms for a few it goes away but it stumbles for a sec when i put it in first as i come up to a light and stop. the rpms fluctuate if i take it in and out of gear while idling.Anybody experience similar probs or have any advice?. Thanks
Reply
Old May 25, 2004 | 11:33 PM
  #2  
mad_7tist's Avatar
Rotary Freak
Tenured Member 05 Years
 
Joined: Jan 2004
Posts: 1,899
Likes: 0
From: tampa
so does it stumble all the time in gear or just cold?
Reply
Old May 25, 2004 | 11:44 PM
  #3  
Mr rx-7 tt's Avatar
rotary sensei
Tenured Member: 20 Years
iTrader: (5)
 
Joined: Mar 2001
Posts: 2,316
Likes: 3
From: Virginia
Does it idle smooth?
Reply
Old May 26, 2004 | 01:16 AM
  #4  
BATMAN's Avatar
Banned. I got OWNED!!!
 
Joined: Feb 2001
Posts: 102
Likes: 0
From: Silicon Valley Bay Area
I had a similar problem and replaced the O2 sensor and it seem to have fixed it.
Reply
Old May 26, 2004 | 11:14 AM
  #5  
jdrebar's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Apr 2004
Posts: 25
Likes: 0
From: seattle
It only runs rough when its cold and i take out of gear after starting in gear for bout 10 secs, if that makes any sense. It stumbles for a sec, cold or warm, when i come to a stop and put it in 1st but after im stopped and i take it in and out of gear it fluctuates. Ive had the engine light come on a while back and the code came up 02 sensor but the manual and mechanic said it would not affect the way it runs. Any other suggestions, this is drivin me nuts. Thanks
Reply
Old May 26, 2004 | 03:51 PM
  #6  
Rx-7pl's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Nov 2003
Posts: 275
Likes: 0
From: Chicago
change o2 sensor
Reply
Old May 26, 2004 | 03:52 PM
  #7  
Rx-7pl's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Nov 2003
Posts: 275
Likes: 0
From: Chicago
change o2 sensor
Reply
Old May 27, 2004 | 06:01 PM
  #8  
jdrebar's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Apr 2004
Posts: 25
Likes: 0
From: seattle
The code for o2 sensor has come on long before this prob. Do you think running rough when cold except when in gear could be caused by the o2. When warmed up it runs ok except it jumps up bout 200 rpm when put in gear at idle.
Reply
Old May 31, 2004 | 09:13 PM
  #9  
jdrebar's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Apr 2004
Posts: 25
Likes: 0
From: seattle
Smile

So has nobody experinced this prob b4? 9 times out of 10 you guys know more than any of my local mechanics. Is this the end of the line for my prob?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
gxl90rx7
Haltech Forum
6
Jun 30, 2017 11:30 PM
kuuva86
2nd Generation Specific (1986-1992)
2
Sep 28, 2015 05:42 AM
firzen
2nd Generation Specific (1986-1992)
9
Sep 15, 2015 12:04 PM
RotaryBobby
1st Generation Specific (1979-1985)
1
Sep 10, 2015 01:33 PM




All times are GMT -5. The time now is 03:41 PM.