Signal lights
#1
Rotary Freak
Thread Starter
iTrader: (28)
Join Date: Jun 2009
Location: Ontario, Canada
Posts: 2,089
Likes: 0
Received 0 Likes
on
0 Posts
Signal lights
Anyone know where I can get these lights from?
93 95 Mazda RX7 Black Housing Smoke Lens Signal Lights | eBay
This person does not ship internationally, and I am in Canada.
I have found other places but they are much more expensive.
Depo 93 99 Mazda RX7 Front Bumper Lights Driving Lamp Black Housing Clear Lens | eBay
This one is triple the cost by the time you add in shipping
93 95 Mazda RX7 Black Housing Smoke Lens Signal Lights | eBay
This person does not ship internationally, and I am in Canada.
I have found other places but they are much more expensive.
Depo 93 99 Mazda RX7 Front Bumper Lights Driving Lamp Black Housing Clear Lens | eBay
This one is triple the cost by the time you add in shipping
#2
I have exactly the same issue. The front bumper lights in my car are on loan from a friend who wants them back.
I want a set of those black lights too, but they don't ship internationally
I want a set of those black lights too, but they don't ship internationally
#3
Senior Member
iTrader: (4)
I've been looking into getting these smoked lights for my car aswell.
I've found an alternate DIY Application. It is a Spray On Tint.
See it here:
http://www.summitracing.com/parts/vht-sp999
Personally, I'm thinking that the Stock Front Bumper Turn Signals may look better with this Spray on Tint rather than getting the aftermarket smoked ones. But you don't know until you see the final product.
I've found an alternate DIY Application. It is a Spray On Tint.
See it here:
http://www.summitracing.com/parts/vht-sp999
Personally, I'm thinking that the Stock Front Bumper Turn Signals may look better with this Spray on Tint rather than getting the aftermarket smoked ones. But you don't know until you see the final product.
#5
I've used that nightshades stuff before on more cars than I can remember. It does not turn out well, or professionally enough imho. I've used it on FD front lights like you suggest, and it turned out looking very average, so I removed it with paint thinner. It makes the FD lights take on a dark purple hue, because the stuff is actually a blackish purple. Ricey and not worth it to me. I'd rather get the black lights from eBay because they would actually look more professional than that spray
#7
Open to donations
iTrader: (2)
Join Date: Nov 2003
Location: Billings, MT
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
i have those lights you posted up, and then i nite shaded them... i like it.. i did all the corner lights except the rears. i just figured the light would be cleaner out of them.
if i could do it all over again, i'd get the pre smoked tinted ones, as i went a little dark. if i can get my pic uploaded, i'll put up a couple tomorrow...
i also changed to all LED's, so the light is crisp.
if i could do it all over again, i'd get the pre smoked tinted ones, as i went a little dark. if i can get my pic uploaded, i'll put up a couple tomorrow...
i also changed to all LED's, so the light is crisp.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
0
09-07-15 10:21 PM