mrb63083

iTrader: (4)

Has anybody ever used these? The lower (hot) hose goes on perfect, no fitment issues. However, the upper "cold" hose that goes to the stock, plastic throttle body pipe seems to be a bit too long.

When I put it on, there is a decent pinch in the bend from the intercooler to the stock, plastic pipe. Am I wrong? I am pretty certain trimming no more than a 1/4 inch off the samco hose would allow it to fit properly without a pinch in the bend.

Just asking before I hacked up the hose... anybody?

Natey

iTrader: (19)

Mine fit pretty well, even with the Blitz SMIC.

Hack it.

mrb63083

iTrader: (4)

???

Natey

iTrader: (19)

Here's mine with an ARC intercooler, which is stock sized.

snip it.

GoodfellaFD3S

iTrader: (213)

Hm, I hope your frame isnt tweaked.

I'd say either cut it or return them and get hard pipes.

mrb63083

iTrader: (4)

I got it to work by taking off the elbow and putting it on there first.

Natey

iTrader: (19)

kensin

iTrader: (22)

wHere can I get this ? I want to replace the stock ones since mine have some split in them thanks