Rough idle, die on gas. No problem if rev.
07-27-13, 10:27 AM
#27
Full Member
Thread Starter
iTrader: (1)
Join Date: Sep 2012
Location: Lavagna (GE) Italy
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
BUMP for further investigation....
After 3-4 hours of badmouthing against Mazda designer I reached and removed fuel rail...
Rubber on primary rail are splitted and really toasted, rubber in secondary rail "hole" (on engine) are the same....
Primary injectors seems very dirty...
I have to look at injectors oring but i hope I have founded the problem.... (no problem on secondary injectors operating range)
After 3-4 hours of badmouthing against Mazda designer I reached and removed fuel rail...
Rubber on primary rail are splitted and really toasted, rubber in secondary rail "hole" (on engine) are the same....
Primary injectors seems very dirty...
I have to look at injectors oring but i hope I have founded the problem.... (no problem on secondary injectors operating range)
03-18-14, 04:01 PM
#29
Full Member
Thread Starter
iTrader: (1)
Join Date: Sep 2012
Location: Lavagna (GE) Italy
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
Solved after a little time XD
One of primary injectors is totally broken (can't hold pressure and leak)
Bought 2 used injectors and cleaned them....now car run perfect
One of primary injectors is totally broken (can't hold pressure and leak)
Bought 2 used injectors and cleaned them....now car run perfect
Thread
Thread Starter
Forum
Replies
Last Post
