imluvinit

iTrader: (1)

this is directed to the guys who have done their own rebuilds. how many of you have the assembly balanced and who do you use to do it. thats my only concern about the build so im tring to get some more input. thanks in advance.

GoodfellaFD3S

iTrader: (213)

Not I. No need for it unless you plan to regularly spin it past the stock redline of 8k, and have all the other mods, such as a bridgeport or peripheral ported engine .

imluvinit

iTrader: (1)

thanks for the input.

fanloi

what will u guy update if u take the engine out and rebuilt it

imluvinit

iTrader: (1)

apex seals, corner seals, new gaskets and few other minor things, other than that im not doing anything else. i thought about doin a street port but i dont feel its needed to reach my power goals. the car has an rb exhaust, 3" mid pipe, 3" down pipe, pt61 turbo, power fc, wahlboro, 1600 cc seconday injectors, 850 primaries, greddy 3 row innercooler, thats really it for the hp things. its nothin fancy. the last time we did a compression test she was gettin real low and since its goin to be in the paint shop for a few weeks i figured i just do a basic rebuild.

mono4lamar

iTrader: (32)

i'll be selling a good shortblock next week... if your interested in some extra motor parts pm me

tsmysak1

Must replace, assuming no internal damage to engine:

Apex seals
Apex seal springs (prefer Mazda)
Side seal springs
Corner seal springs
Combustion seals
Water jacket seals
Oil metering pump lines (2)
Oil metering pump seals and copper washers
All fuel hoses
Fuel injector cleaning
Oil pickup and crossover tube gaskets
Oil filter stand o-rings
Dowel pin o-rings
Thrust bearings (why would you not?)
E-shaft seals front and rear
Corner seal plugs if applicable

Replace as needed:

Oil pump
Oil pump chain
Coolant hoses (some will argue this)
Corner seals
Side seals
Rotor bearings
E-shaft bearings

Must do's :

Clean clean clean and more cleaning - the secret to success
Hylomar sealant

imluvinit

iTrader: (1)

tsmysak1-----thanks for the info but i already knew that and have done some of it already ,ie oil metering pump lines and the the injector cleaning, actually put brand new ones in. thanks for making sure i was on the right track though it is appreciated. actually that is not all true i havnt used hylomar sealant before.....hhhmmmm learned something...lol.