rear passenger side upper control arm..same as driver side?
Lives on the Forum
Joined: Dec 2001
Posts: 14,716
Likes: 10
From: San Lorenzo, California
They are the same part for either left or right. However, there are two different part numbers for base/PEG/PEP/touring and then R-models.
The arm for base/touring models should be part number: F123-28-2A0A
The R-model arm is: FD01-28-2A0B
The arm for base/touring models should be part number: F123-28-2A0A
The R-model arm is: FD01-28-2A0B
Thread Starter
Banned. I got OWNED!!!
Joined: Jun 2002
Posts: 3,323
Likes: 1
From: Buckhead
DUDE...I took my arm off and both the upper bushings were tight as hell. only the lower bushing was bad. Im thinkin' of having quick rick put a bushing in it and put it on my passenger side.
Thread Starter
Banned. I got OWNED!!!
Joined: Jun 2002
Posts: 3,323
Likes: 1
From: Buckhead
DUDE...I took my arm off and both the upper bushings were tight as hell. only the lower bushing was bad. Im thinkin' of having quick rick put a bushing in it and put it on my drivers side.
Lives on the Forum
Joined: Dec 2001
Posts: 14,716
Likes: 10
From: San Lorenzo, California
Originally posted by turbojeff
No they are NOT the same part.
Rynberg, check your info.
No they are NOT the same part.
Rynberg, check your info.
I know how knowledgable you are so I believe you, but could you "prove me wrong" so I can see where I'm missing it?
Thread Starter
Banned. I got OWNED!!!
Joined: Jun 2002
Posts: 3,323
Likes: 1
From: Buckhead
Wow tyler, I'm gonna make you come over and chage my arm for misleading me...your no friend 
.
really... I only have 1 bad bushing now. My lower control arm bushing is bad. My clunking when I hit my brake is 99 pct gone, I can slightly feel another clunk on the same side, that must be the lower control arm bushing. My squeeking has been gone since then too...
So for now I'm gonna keep that arm
.really... I only have 1 bad bushing now. My lower control arm bushing is bad. My clunking when I hit my brake is 99 pct gone, I can slightly feel another clunk on the same side, that must be the lower control arm bushing. My squeeking has been gone since then too...
So for now I'm gonna keep that arm
Trending Topics
OK, my BAD... I read front upper control arm not rear!
Last night I changed out a right rear upper control arm probably 30 before I read this post, I don't know what I was thinking. Anyway I had 3 of them in my hands, they do look identical.
Sorry rynberg.
Last night I changed out a right rear upper control arm probably 30 before I read this post, I don't know what I was thinking. Anyway I had 3 of them in my hands, they do look identical.
Sorry rynberg.
Thread Starter
Banned. I got OWNED!!!
Joined: Jun 2002
Posts: 3,323
Likes: 1
From: Buckhead
Originally posted by turbojeff
OK, my BAD... I read front upper control arm not rear!
Last night I changed out a right rear upper control arm probably 30 before I read this post, I don't know what I was thinking. Anyway I had 3 of them in my hands, they do look identical.
Sorry rynberg.
OK, my BAD... I read front upper control arm not rear!
Last night I changed out a right rear upper control arm probably 30 before I read this post, I don't know what I was thinking. Anyway I had 3 of them in my hands, they do look identical.
Sorry rynberg.
I tried to change mine out myself last night,but the bolt near the caliper that holds that shocky thingy in place would not come loose, so I took it to a shop.
Lives on the Forum
Joined: Dec 2001
Posts: 14,716
Likes: 10
From: San Lorenzo, California
Originally posted by turbojeff
OK, my BAD... I read front upper control arm not rear!
OK, my BAD... I read front upper control arm not rear!
Thread
Thread Starter
Forum
Replies
Last Post
Frisky Arab
2nd Generation Specific (1986-1992)
13
Aug 18, 2015 05:30 PM
