RDash Install
10-28-09, 04:08 AM
#1
Rotary Enthusiast
Thread Starter
Join Date: Jan 2004
Location: New Zealand
Posts: 1,003
Likes: 0
Received 0 Likes
on
0 Posts
RDash Install
A local guy was selling an old RDash EL white faced dash for an Fd3s . I managed to score it for like nz$50 . initially I was weary of Taiwanese made stuff but I really wanted a change with my stock dash and unless you can find a Spirit R dash or pay swillions for Amemiya or Knightsport I fugured what the hell its only $50 .
The install took like an hour, really easy , you dont even need to remove any needles , you just undo the very small screws on your stock dash , slip these ones in over the top of your stock dash , route the wiring and all good to go. It just has a positive + & - wires and small controller which switches the dash from EL blue and EL Green and fader.
All of the faces fitted perfectly apart from the tacho which came in 2 pieces, the centre piece i had to double side tape down but un noticable.
Over all , $50 well spent.
link --> http://www.rdash.com.tw/rdash/product_el.php
The install took like an hour, really easy , you dont even need to remove any needles , you just undo the very small screws on your stock dash , slip these ones in over the top of your stock dash , route the wiring and all good to go. It just has a positive + & - wires and small controller which switches the dash from EL blue and EL Green and fader.
All of the faces fitted perfectly apart from the tacho which came in 2 pieces, the centre piece i had to double side tape down but un noticable.
Over all , $50 well spent.
link --> http://www.rdash.com.tw/rdash/product_el.php
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
11-10-18 12:03 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM