LalitosRx-7

just got done replacing my Bonez DP high flow cat and RB dual tip exhaust. one last thing on RB exaust left side has the hanger and right side has that tab with two holes on it. what can i secure the right side tab to anybody have any pictures? id rather finish it myself instead of taking it to the muffler shop.
thanks

crcleofdst

The right side bolts up just the the stock exhaust. Unless you lost the hanger, or its still bolted to your stock exhaust, it should be there.

LalitosRx-7

sorry i had the power extreme exhaust before and that one had the two hangers attached to the exhaust. the RB has one hanger on left side and a tab on right side. i have the left side attched to the rubber hanger already.

crcleofdst

Your going to need the right side hanger from a stock exhaust then. If you can't find one, it may be easier for you to just have a muffler shop fab it up for you. Should take very long for them to do.

LalitosRx-7

thanks for the input. i had the power extreme for a couple of years and didnt realize that the original stock exhaust would have had a different set up(hanger). first time replacing my whole exhaust so most of it has been trial and error.
thanks again!

DaleClark

iTrader: (55)

Yep, the stock exhaust has a small bracket that bolts on there. Call Ray at Malloy - the part new is really cheap, like $8 or something. Don't let a muffler shop ghetto-weld something to your nice $600 exhaust!

FYI - Ray at Malloy Mazda - 888-533-3400. Just tell him you want the 2-bolt muffler bracket that goes to the back of the stock muffler and he'll get you the right part.

Dale

DaveW

Hey, Dale,

We've missed you!

Any news on maybe getting your site back up? We've missed that, too!

LalitosRx-7

thanks just ordered the hanger. The updated part # is now N3A1-40-290A cost: $7.13 from Ray @ Malloy the dealer around here has a different price of $16.53

question: whats the purpose of the check valve off the stock catalic converter on the oxygen line (preplaced by a staight pipe on my new high flow cat) and the ground strap that attaches to the cat or muffler?

thanks!

RICKRX7

I believe it is there to keep the exhaust from flowing back. I put one on my HF cat anyways.