raceported engine prices
#1
Ahhhh Motherland!
Thread Starter
Join Date: Nov 2003
Location: CA: Van Nuys
Posts: 715
Likes: 0
Received 0 Likes
on
0 Posts
raceported engine prices
where can i get the best price for a rebuilt raceported engine with 3mm apex seals for a 1994 rx-7 touring? probably a 13b engine or whatever fits inside the engine bay without any problems.
P.S. to all moderators please don't close this post for the same reason you always do about the search option cause i can't find anything about "raceported engine prices"
thank-you
P.S. to all moderators please don't close this post for the same reason you always do about the search option cause i can't find anything about "raceported engine prices"
thank-you
#2
Mr. Links
iTrader: (1)
Re: raceported engine prices
Originally posted by austinsFD
where can i get the best price for a rebuilt raceported engine with 3mm apex seals for a 1994 rx-7 touring? probably a 13b engine or whatever fits inside the engine bay without any problems.
where can i get the best price for a rebuilt raceported engine with 3mm apex seals for a 1994 rx-7 touring? probably a 13b engine or whatever fits inside the engine bay without any problems.
Pick up the phone and find out:
http://www.pettitracing.com/Frameset.html
http://www.pineappleracing.com/
http://www.kdrotary.com/
Originally posted by austinsFD
P.S. to all moderators please don't close this post for the same reason you always do about the search option cause i can't find anything about "raceported engine prices"
P.S. to all moderators please don't close this post for the same reason you always do about the search option cause i can't find anything about "raceported engine prices"
#6
Rotary Enthusiast
Join Date: Mar 2002
Location: DE, Taiwan
Posts: 751
Likes: 0
Received 0 Likes
on
0 Posts
Re: raceported engine prices
[QUOTE]Originally posted by austinsFD
[B]where can i get the best price for a rebuilt raceported engine with 3mm apex seals for a 1994 rx-7 touring? probably a 13b engine or whatever fits inside the engine bay without any problems.
If you don't know what kind of motor your car has in it, you would most likely be exceeding your own knowledge and experience if you were to go with a raceport. I wouldn't recommend you be so ambitious with your choice of engine tuning if you don't know what you are doing. Also try searching for 3mm seals and information on them. You need to know more about them then just the idea that they're thicker.
[B]where can i get the best price for a rebuilt raceported engine with 3mm apex seals for a 1994 rx-7 touring? probably a 13b engine or whatever fits inside the engine bay without any problems.
If you don't know what kind of motor your car has in it, you would most likely be exceeding your own knowledge and experience if you were to go with a raceport. I wouldn't recommend you be so ambitious with your choice of engine tuning if you don't know what you are doing. Also try searching for 3mm seals and information on them. You need to know more about them then just the idea that they're thicker.
Trending Topics
#12
built my own engine
street port is anything that modifies the size of the stock runners
when you bridge, you add additional secondary runners
when you j port, you add a larger bridge
when you bridge, you add additional secondary runners
when you j port, you add a larger bridge
#15
built my own engine
Originally posted by DCrosby
Race port = Street Port with Enlarged Primary Intake ports
Street Port = Stock Primaries, enlarged secondaries...
Race port = Street Port with Enlarged Primary Intake ports
Street Port = Stock Primaries, enlarged secondaries...
#16
No it's not Turbo'd
Yes, I was trying to simplify, if it's a true streetport, the primaries are enlarged by a bit, to increase airflow and not alter timing, the secondaries are altered by quite a lot since that's where most of the power sits...
Race Port doesn't care about smog / timing, is usually taken care of by programmable ECU, and therefore both sets of ports are altered...
Race Port doesn't care about smog / timing, is usually taken care of by programmable ECU, and therefore both sets of ports are altered...
#17
built my own engine
i sold "austinsFD" my PowerFC
he msgd me telling me he found out how to make it have more horsepower
(he only has an intake and a cat back)
he said he set it to 1.10kg/cm2 and 90% on the boost screen, it uses a lot of gas but it's faster
he msgd me telling me he found out how to make it have more horsepower
(he only has an intake and a cat back)
he said he set it to 1.10kg/cm2 and 90% on the boost screen, it uses a lot of gas but it's faster
#18
Originally posted by 93BlackFD
i sold "austinsFD" my PowerFC
he msgd me telling me he found out how to make it have more horsepower
(he only has an intake and a cat back)
he said he set it to 1.10kg/cm2 and 90% on the boost screen, it uses a lot of gas but it's faster
i sold "austinsFD" my PowerFC
he msgd me telling me he found out how to make it have more horsepower
(he only has an intake and a cat back)
he said he set it to 1.10kg/cm2 and 90% on the boost screen, it uses a lot of gas but it's faster
#20
Lives on the Forum
Join Date: Dec 2001
Location: San Lorenzo, California
Posts: 14,716
Likes: 0
Received 8 Likes
on
8 Posts
Originally posted by 93BlackFD
sadly no, he keeps asking me whats the setting to change how much horsepower the car has
sadly no, he keeps asking me whats the setting to change how much horsepower the car has
Yeah, I knew from all of his posts so far that that car is doomed....
#21
Rotary Freak
Join Date: Mar 2003
Location: GLENDALE, CA
Posts: 2,274
Likes: 0
Received 0 Likes
on
0 Posts
you could tell he didnt know what he was doing when he said "or whatever fits"
if he doesnt know a port changes the internals and doesnt make the engine bigger, than he is driving the wrong car. i feel a new engine coming on!!
if he doesnt know a port changes the internals and doesnt make the engine bigger, than he is driving the wrong car. i feel a new engine coming on!!
#22
OFENSIV
iTrader: (6)
Originally posted by DCrosby
Race port = Street Port with Enlarged Primary Intake ports
Street Port = Stock Primaries, enlarged secondaries...
Race port = Street Port with Enlarged Primary Intake ports
Street Port = Stock Primaries, enlarged secondaries...
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
0
08-18-15 10:01 PM