Question about "Pressure Regulator" ?
#1
Full Member
Thread Starter
Join Date: Jan 2007
Location: Tacoma, WA
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
Question about "Pressure Regulator" ?
Hey so a friend and I did a conversion from sequential to non sequential, it works ok, but i cannot hear my blow off valve at all ever, boost and power are all ok. I researched and found this diagram here scroll down and look at the post from Xblazinlv there is a diagram picture
https://www.rx7club.com/showthread.p...ntial+pictures
right now i have the green line from the diagram connected to my blow off valve (greddy) and the diagram shows that i am wrong, and that the green line goes to a "pressure regulator" but if I correct my hose from the UIM to my blow off valve then that green line i dont know where to connect it and I dont know what the Pressure Regulator is please advise thank you.
https://www.rx7club.com/showthread.p...ntial+pictures
right now i have the green line from the diagram connected to my blow off valve (greddy) and the diagram shows that i am wrong, and that the green line goes to a "pressure regulator" but if I correct my hose from the UIM to my blow off valve then that green line i dont know where to connect it and I dont know what the Pressure Regulator is please advise thank you.
Thread
Thread Starter
Forum
Replies
Last Post