Anyone know if it's possible to get frame parts from anywhere. I need the sheetmetal that is under the rear bumper support. I do not think mine is salvageable. Please help

 

dealership...

 

Would they have actual frame parts of the car

 

FD01-70-750C

$272.55 at Mazda

Call Ray Crowe at Malloy Mazda or your local Mazda dealership. They should be able to get it for you.


Part #1

 

Thank you man. How'd you find this out so quickly?

 

As noted. Call Ray Crowe at Malloy Mazda. They sell OEM sheet metal and it is inexpensive. It generally takes him a day or two to order it in.

If you don't want brand new, I have a shell that I cut up to fix something on my car and I may have what you are looking for. Down in Gainesville so not terrible far from Savannah if you wanted to cut yourself and pick up.

 

Nah. Thank you though. I already went to Mazda. I just want to know how to find the p.n so I don't have to ask

 

Show us how it turns out!

 

Will do. They were very helpful. I believe it's going to be about 300 after taxes which I'll probably be purchasing on the 1st

 

https://www.rx7club.com/3rd-generation-specific-1993-2002-16/how-find-mazda-part-numbers-616134/

Download the service and parts manuals at http://www.wrex-racing.com/web/fd/info.htm

They also have a collision manual there you might want to look through.

 

Thank you.!! Will be downloading this

 

Sorry to steal your thread but does piece 1 bolt onto the frame or is it welded on?

 

If it is the metal bumper guard underneath the skin it is bolted on.

 

I'm pretty sure it's welded

 

it's the metal frame where it holds the trunk keyhole. I was wondering if it would be cheaper for me to replace it or bring it to the body shop for repair since it is slightly dented in.

 

I'll look at mine tomorrow and take a picture since the rear bumper is off. We might be talking about 2 different things. The part I'm referencing to is removable.

 

The part I'm talking about is the one label part #1 in the diagram above. A pix would definitely help. Thanks

 

it should be the part where mine is damaged which is welded on....
https://lh6.googleusercontent.com/-z...0/DSC01812.JPG

 

it only costs 300 for the number 1 part at the dealer. i might be ordering it soon.

 

Yup. That's the same part where mines is damaged but mines is only pushed in by 1/4 of an inch only. So hopefully the shop can fix it for less than $300

 

Part pictures as requested:

 

I hope we are right lol